|
LOW POWER FM TRANSMITTERS/EXCITERS
(87.5-108 MHz)
|
PE 20 |
Synthesized, 10 kHz steps,
internal frequency setting, 0-20 W adjustable. |
|
KE 20 |
FM exciter for high quality
digital audio. Synthesized, steps 10 kHz, 0-25 W adjustable, SCA/RDS inputs. Fully compatible with all digital audio sources.
(See below options available). |
|
KCL 30 |
Digital/analog audio
compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control
and measurements. 0 - 30 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control &
telemetry (opt.) . |
|
TRP 15/2 |
Portable transmitter
with external frequency selector, 82 - 108 MHz, 0-15 W adjustable, 12 VDC, complete with mike and antenna. Others frequency
bands on request. |
|
PM 60 |
Compact high quality-signal
FM transmitter. 0-60 W out adjustable, synthesized, agile frequency setting, excellent S/N ratio ( 80 dB), SCA/RDS inputs,
electronic protections, complete metering. (See below options available). |
|
KCL 60 |
Digital/analog audio
compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control
and measurements. 0 - 60 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control &
telemetry (opt.) . |
|
PM 120 |
Compact high quality-signal
FM transmitter. 0-110 W out adjustable, synthesized, agile frequency setting, excellent S/N ratio ( 78 dB), SCA/RDS inputs,
electronic protections, complete metering. (See below options available). |
|
KCL 120 |
Digital/analog audio
compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control
and measurements. 0 - 120 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control &
telemetry (opt.) . |
|
PM 200 |
Compact high quality-signal
FM transmitter. 0-200 W out adjustable, new Cold-FetTM technology, freq. programmable, excellent S/N ratio ( 78
dB), SCA/RDS inputs, proportional foldback protection, complete metering. (See below options available). |
|
KCL 200 |
Digital/analog audio
compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control
and measurements. 0 - 200 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control &
telemetry (opt.) . |
|
PM 300 |
Like PM 200 with 320
W output power. |
|
KCL 300 |
Like KCL 200 with 320
W output power. |
|
PM 500 |
Like PM 200 with 550
W output power. |
|
KCL 500 |
Like KCL 200 with 550
W output power. |
|
PM 1000 |
Like PM 200 with 1050
W output power. |
|
KCL 1000 |
Like KCL 200 with 1050
W output power. |
|
|
OPTIONS FOR PE 20,
KE 20, KCL 30/60/120/200/300/500, PM 60/120/300/500. |
|
/S |
High performance built-in
DIGITAL STEREO GENERATOR, stereo separation > 78 dB. |
|
/C |
Front panel frequency
setting. |
|
/P |
Built-in STEREO AUDIO
PROCESSOR (only for PM 60, PM 120, PM 200, PM 300 and PM 500). |
|
/R |
Remote control interface. |
|
/K |
FSK IDer. for FCC automatic
identification system. |
|
/HS |
High frequency stability
< 300 Hz. |
|
/SCA3 |
Additional 2 x SCA/RDS
inputs. |
|
/VDC-24 |
24 Vdc power supply.
( for PE 20, KE 20, KCL 30, KCL 60, PM 60, PM 120 ). |
|
/VDC-48 |
48 Vdc power supply.
( for PM 200, PM 300, PM 500, KCL 200, KCL 300, KCL 500 ) . |
SOLID-STATE
MOS-FET FM AMPLIFIERS (87.5-108 MHz)
|
KN 100 |
0-120 W output (adjustable) with 0-10 W input, broadband,
fully protected. Without rack. |
|
KF 300 |
0-320 W out (adjustable) with 0-10 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. Without rack. |
|
KF 500 |
0-550 W out (adjustable) with 0-12 W input, new Cold-FetTMtechnology,
broadband, proportional foldback logic for uninterrupted service. Without rack. |
|
KFS 1000 |
0-1050 W out (adjustable) with 0-16 W input. 3HE/19"
rack. New Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC
switching power supply without step-down transformer. Air cooled. |
|
KF 1000 |
0-1100 W out (adjustable) with 0-18 W input. 4HE/19"
rack. New Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. Switching power
supply without step-down transformer. Air cooled. |
|
KFS 1000/U3 |
0-1050 W Up-Gradable amplifier composed by 1 x KFM
1000 plug-in module and 1 x 14HE/19" rack with air cooling system. This amplifier can be up-graded up to 2 or 3 kW adding
2/3 KFM 1000 modules and a 2/3-way combiner. |
|
KFM 1000 |
0-1050 W plug-in module amplifier without cabinet and
cooling system to use as up-grading module in KFS 1000/U3 power amplifier or as spare unit in KFS series amplifiers. Dimensions:
2HE/19". |
|
KFCU/2 |
2-way combiner and control unit to up-grade to 2 kW
the output power of KFS 1000/U3 amplifier. Includes in/out connecting cables. |
|
KFCU/3 |
3-way combiner and control unit to up-grade to 3 kW
the output power of KFS 1000/U3 amplifier. Includes in/out connecting cables. |
|
KFS 2000 |
0-2000 W out (adjustable) with 0-40 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture. Composed by 2X1
kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KF 2000 |
Like KFS 2000 composed by 2 x KF 1000 amplifiers, 2-way
coupler and cabinet. |
|
KFS 3000 |
0-3000 W out (adjustable) with 0-60 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture. Composed by 3X1
kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KF 3000 |
Like KFS 3000 composed by 3 x KF 1000 amplifiers, 3-way
coupler and cabinet. |
|
KFS 4000 |
0-4000 W out (adjustable) with 0-100 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture. Composed by 4X1
kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KF 4000 |
Like KFS 4000 composed by 4 x KF 1000 amplifiers, 4-way
coupler and cabinet. |
|
KFS 5000 |
0-5000 W out (adjustable) with 0-120 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture. Composed by 5X1
kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KF 5000 |
Like KFS 5000 composed by 5 x KF 1000 amplifiers, 5-way
coupler and cabinet. |
|
KFS 6000 |
0-6000 W out (adjustable) with 0-150 W input, new Cold-FetTM
technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture. Composed by 6X1
kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KFS 10000 |
0-10000 W out (adjustable) with 0-350 W input, new
Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture.
Composed by 10X1 kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KFS 12000 |
0-12000 W out (adjustable) with 0-420 W input, new
Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture.
Composed by 12X1 kW on air serviceable modules. Air cooled. Includes 19" cabinet. |
|
KFS 20000 |
0-20000 W out (adjustable) with 0-1000 W input, new
Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture.
Composed by 2x10 kW amplifiers and 2-way coupler. Air cooled. Includes 19" cabinet. |
|
KFS 30000 |
0-20000 W out (adjustable) with 0-2000 W input, new
Cold-FetTM technology, broadband, proportional foldback logic for uninterrupted service. High redundancy architecture.
Composed by 3x10 kW amplifiers and 3-way coupler. Air cooled. Includes 19" cabinet. |
|
|
REMOTE CONTROL INTERFACE FOR KF & KFS AMPLIFIERS |
|
KFA/RC |
Full remote control interface for KF 300, KF 500, KF
1000 amplifiers. |
|
KFS/RC |
Full remote control interface for KFS 2000, KFS 3000,
KFS 4000, KFS 5000, KFS 6000, KFS 10000 and KFS 12000 amplifiers. |
|
KFS/RC/20/K |
Full remote control interface for KFS 20000 amplifier. |
|
KFS/RC/30/K |
Full remote control interface for KFS 30000 amplifier. |
|
|
CABINET FOR KF 300, KF 500, KF 1000 MODELS. |
|
RK 19"-5U |
19"-5U cabinet. |
|
RK 19"-6U |
19"-6U cabinet. |
|
RK 19"-9U |
19"-9U cabinet. |
|
RK 19"-24U |
19"-24U cabinet. |
|
RK 19"-41U |
19"-41U cabinet. |
|
|
COOLING OPTIONS FOR KFS SERIES |
|
|
All KFS series amplifiers are available with exhaust
cooling air exit either on the rear panel or on the top side of cabinet. Please specify your choice upon order. Chmineys and
hardware for exhaust cooling air are available on request. |
TUBE FM AMPLIFIERS
|
KA 1000 |
0-1000 W output (adj.),
0-20 W input, fully protected. Tube included. |
|
KA 1500 |
0-1600 W output (adj.),
0-40 W input, fully protected. Tube included. |
|
KA 2500 |
0-2400 W output (adj.),
0-65 W input, fully protected. Tube included. |
|
KA 6000 |
0-6000 W output (adj.),
0-250 W input, fully protected. High efficiency cavity. 220/380 Vac, three-phase power supply. Tube included. |
|
KA 6000/M |
0-6000 W output (adj.),
0-250 W input, fully protected. High efficiency cavity. 110/240 Vac, single-phase power supply. Tube included. |
|
KA 10000 |
0-10000 W output (adj.),
0-450 W input, fully protected. High efficiency cavity. Tube included. |
|
KA 10000/M |
0-10000 W output (adj),
0-450 W input, fully protected. High efficiency cavity. 110/220 Vac, single-phase power supply. Tube included. |
|
KA 12000 |
0-12000 W output (adj.),
0-500 W input, fully protected. High efficiency cavity. Tube included. |
|
KA 15000 |
0-15000 W output (adj.),
0-800 W input, fully protected, tube included. High efficiency cavity. Tube included. |
|
KA 20000 |
0-20000 W output (adj.),
0-1000 W input, fully protected. High efficiency cavity. Tube included. |
|
KA 35000 |
0-35000 W output (adj.),
0-1000 W input, fully protected. High efficiency cavity. Tube included. |
SOLID-STATE
MOSFET FM TRANSMITTERS - new COLD-FET TM tech.
|
PM 100/K |
100 W solid state FM transmitter composed of: KE 20, KN 100. |
|
PM 100/LD |
100 W solid state FM transmitter composed of: KCL 30, KN 100. |
|
PF 300/K |
300 W solid state FM transmitter composed of: KE 20, KF 300, RK 19-6U cabinet. |
|
PF 300/LD |
300 W solid state FM transmitter composed of: KCL 30, KF 300, RK 19-6U cabinet. |
|
PF 500/K |
550 W solid state FM transmitter composed of: KE 20, KF 500, RK 19-9U cabinet. |
|
PF 500/LD |
550 W solid state FM transmitter composed of: KCL 30, KF 500, RK 19-9U cabinet. |
|
PFS 1000/K |
1000 W solid state FM transmitter composed of: KE 20, KFM 1000, RK 19-9U cabinet. |
|
PFS 1000/LD |
1000 W solid state FM transmitter composed of: KCL 30, KFM 1000, RK 19-9U cabinet. |
|
PF 1000/K |
1050 W solid state FM transmitter composed of: KE 20, KF 1000, RK 19-9U cabinet. |
|
PF 1000/LD |
1050 W solid state FM transmitter composed of: KCL 30, KF 1000, RK 19-9U cabinet. |
|
PFU 1000/K |
1050 W Up-Gradable transmitter composed of: KE 20, KFS 1000/U3.(See above for up-grading parts) |
|
PFU 1000/LD |
1050 W Up-Gradable transmitter composed of: KCL 30, KFS 1000/U3.(See above for up-grading parts) |
|
PFS 2000/P |
2000 W solid state FM transmitter composed of: PM 60, KFS 2000, 19" cabinet. |
|
PFS 2000/K |
2000 W solid state FM transmitter composed of: KE 20, KN 100, KFS 2000, 19" cabinet. |
|
PFS 2000/LDE |
2000 W solid state FM transmitter composed of: KCL 60, KFS 2000, 19" cabinet. |
|
PFS 2000/LD |
1000 W solid state FM transmitter composed of: KCL 30, KFS 1000, 19" cabinet. |
|
PF 2000/P |
2000 W solid state FM transmitter composed of: PM 60,
KF 2000, 19" cabinet. |
|
PF 2000/K |
2000 W solid state FM transmitter composed of: KE 20, KN 100, KF 2000, 19" cabinet. |
|
PF 2000/LDE |
2000 W solid state FM transmitter composed of: KCL 60, KF 2000, 19" cabinet. |
|
PF 2000/LD |
2000 W solid state FM transmitter composed of: KCL 30, KN 100, KF 2000, 19" cabinet. |
|
PFS 3000/P |
3000 W solid state FM transmitter composed of: PM 120, KFS 3000, 19" cabinet. |
|
PFS 3000/K |
3000 W solid state FM transmitter composed of: KE 20, KN 100,KFS 3000, 19" cabinet. |
|
PFS 3000/LDE |
3000 W solid state FM transmitter composed of:KCL 120, KFS 3000, 19" cabinet. |
|
PFS 3000/LD |
3000 W solid state FM transmitter composed of:KCL 30, KN 100, KFS 3000, 19" cabinet. |
|
PF 3000/P |
3000 W solid state FM transmitter composed of: PM 120, KF 3000, 19" cabinet. |
|
PF 3000/K |
3000 W solid state FM transmitter composed of: KE 20, KN 100,KF 3000, 19" cabinet. |
|
PF 3000/LDE |
3000 W solid state FM transmitter composed of:KCL 120, KF 3000, 19" cabinet. |
|
PF 3000/LD |
3000 W solid state FM transmitter composed of:KCL 30, KN 100, KF 3000, 19" cabinet. |
|
PFS 4000/P |
4000 W solid state FM transmitter composed of: PM 120, KFS 4000, 19" cabinet. |
|
PFS 4000/K |
4000 W solid state FM transmitter composed of: KE 20, KN 100,KFS 4000, 19" cabinet. |
|
PFS 4000/LDE |
4000 W solid state FM transmitter composed of:KCL 120, KFS 4000, 19" cabinet. |
|
PFS 4000/LD |
4000 W solid state FM transmitter composed of:KCL 30, KN 100, KFS 4000, 19" cabinet. |
|
PF 4000/P |
4000 W solid state FM transmitter composed of: PM 120, KF 4000, 19" cabinet. |
|
PF 4000/K |
4000 W solid state FM transmitter composed of: KE 20, KN 100,KF 4000, 19" cabinet. |
|
PF 4000/LDE |
4000 W solid state FM transmitter composed of:KCL 120, KF 4000, 19" cabinet. |
|
PF 4000/LD |
4000 W solid state FM transmitter composed of:KCL 30, KN 100, KF 4000, 19" cabinet. |
|
PFS 5000/P |
5000 W solid state FM transmitter composed of: PM 300, KFS 5000, 19" cabinet. |
|
PFS 5000/K |
5000 W solid state FM transmitter composed of: KE 20, KF 300,KFS 5000, 19" cabinet. |
|
PFS 5000/LDE |
5000 W solid state FM transmitter composed of:KCL 300, KFS 5000, 19" cabinet. |
|
PFS 5000/LD |
5000 W solid state FM transmitter composed of:KCL 30, KF 300, KFS 5000, 19" cabinet. |
|
PF 5000/P |
5000 W solid state FM transmitter composed of: PM 300, KF 5000, 19" cabinet. |
|
PF 5000/K |
5000 W solid state FM transmitter composed of: KE 20, KF 300,KF 5000, 19" cabinet. |
|
PF 5000/LDE |
5000 W solid state FM transmitter composed of:KCL 300, KF 5000, 19" cabinet. |
|
PF 5000/LD |
5000 W solid state FM transmitter composed of:KCL 30, KF 300, KF 5000, 19" cabinet. |
|
PFS 6000/P |
6000 W solid state FM transmitter composed of: PM 300, KFS 6000, 19" cabinet. |
|
PFS 6000/K |
6000 W solid state FM transmitter composed of: KE 20, KF 300,KFS 6000, 19" cabinet. |
|
PFS 6000/LDE |
6000 W solid state FM transmitter composed of:KCL 300, KFS 6000, 19" cabinet. |
|
PFS 6000/LD |
6000 W solid state FM transmitter composed of:KCL 30, KF 300, KFS 6000, 19" cabinet. |
|
PF 6000/P |
6000 W solid state FM transmitter composed of: PM 300, KF 6000, 19" cabinet. |
|
PF 6000/K |
6000 W solid state FM transmitter composed of: KE 20, KF 300,KF 6000, 19" cabinet. |
|
PF 6000/LDE |
6000 W solid state FM transmitter composed of:KCL 300, KF 6000, 19" cabinet. |
|
PF 6000/LD |
6000 W solid state FM transmitter composed of:KCL 30, KF 300, KF 6000, 19" cabinet. |
|
PFS 10000/P |
10000 W solid state FM transmitter composed of: PM 500, KFS 10000, 19" cabinet. |
|
PFS 10000/K |
10000 W solid state FM transmitter composed of: KE 20, KF 500,KFS 10000, 19" cabinet. |
|
PFS 10000/LDE |
10000 W solid state FM transmitter composed of:KCL 500, KFS 10000, 19" cabinet. |
|
PFS 10000/LD |
10000 W solid state FM transmitter composed of:KCL 30, KF 500, KFS 10000, 19" cabinet. |
|
PFS 12000/P |
12000 W solid state FM transmitter composed of: PM 500, KFS 12000, 19" cabinet. |
|
PFS 12000/K |
12000 W solid state FM transmitter composed of: KE 20, KF 500,KFS 12000, 19" cabinet. |
|
PFS 12000/LDE |
12000 W solid state FM transmitter composed of:KCL 500, KFS 12000, 19" cabinet. |
|
PFS 12000/LD |
12000 W solid state FM transmitter composed of:KCL 30, KF 500, KFS 12000, 19" cabinet. |
|
PFS 20000/K |
20000 W solid state FM transmitter composed of: KE 20, KFS 1000,KFS 20000, 2 x 19" cabinet. |
|
PFS 20000/LD |
20000 W solid state FM transmitter composed of:KCL 30, KFS 1000, KFS 20000, 2 x 19" cabinet. |
|
PFS 30000/K |
30000 W solid state FM transmitter composed of: PFS 2000/K, KFS 30000, 3 x 19" cabinet. |
|
PFS 30000/LD |
30000 W solid state FM transmitter composed of: PFS 2000/LD, KFS 30000, 3 x 19" cabinet. |
|
|
OPTIONS FOR SOLID STATE FM TRANSMITTERS |
|
/S |
High performance built-in DIGITAL STEREO GENERATOR,
stereo separation > 78 dB. For KE 20, KCL 30, KCL 60, KCL 120, KCL 300, KCL 500, PM 120, PM 300, PM 500 and all versions /K and /P and /LD only. |
|
NOTE: |
For remote control interfaces, air chmineys and standard
or special cabinets see above "SOLID STATE MOS-FET AMPLIFIERS" section. |
TUBE TRANSMITTERS
|
PM 1000/T |
1000 W tube FM transmitter composed of: PE 20, KA 1000. |
|
PM 1000/TK |
1000 W tube FM transmitter composed of: KE 20, KA 1000. |
|
PM 1000/TLD |
1000 W tube FM transmitter composed of: KCL 30, KA 1000. |
|
PM 1500/T |
1500 W tube FM transmitter composed of: PE 20, KN 100, KA 1500. |
|
PM 1500/TK |
1500 W tube FM transmitter composed of: KE 20, KN 100, KA 1500. |
|
PM 1500/TLD |
1500 W tube FM transmitter composed of: KCL 30, KN 100, KA 1500. |
|
PM 2500/T |
2500 W tube FM transmitter composed of: PE 20, KN 100, KA 2500. |
|
PM 2500/TP |
2500 W tube FM transmitter
composed of: PM 120, KA 2500. |
|
PM 2500/TK |
2500 W tube FM transmitter composed of: KE 20, KN 100, KA 2500. |
|
PM 2500/TLD |
2500 W tube FM transmitter composed of: KCL 30, KN 100, KA 2500. |
|
PM 6000/TP |
6000 W tube FM transmitter composed of: PM 300, KA 6000. |
|
PM 6000/TK |
6000 W tube FM transmitter composed of: KE 20, KF 300, KA 6000. |
|
PM 6000/TLD |
6000 W tube FM transmitter composed of: KCL 30, KF 300, KA 6000. |
|
PM 10000/TP |
10000 W tube FM transmitter composed of: PM 500, KA 10000. |
|
PM 10000/TK |
10000 W tube FM transmitter composed of: KE 20, KF 500, KA 10000. |
|
PM 10000/TLD |
10000 W tube FM transmitter composed of: KCL 30, KF 500, KA 10000. |
|
PM 12000/TP |
12000 W tube FM transmitter composed of: PM 500, KA 12000. |
|
PM 12000/TK |
12000 W tube FM transmitter composed of: KE 20, KF 500, KA 12000. |
|
PM 12000/TLD |
12000 W tube FM transmitter composed of: KCL 30, KF 500, KA 12000. |
|
PM 15000/TK |
15000 W tube FM transmitter composed of: KE 20, KF 1000, KA 15000. |
|
PM 15000/TLD |
15000 W tube FM transmitter composed of: KCL 30, KF 1000, KA 15000. |
|
PM 20000/TK |
20000 W tube FM transmitter composed of: KE 20, KF 1000, KA 2000. |
|
PM 20000/TLD |
20000 W tube FM transmitter composed of: KCL 30, KF 1000, KA 20000. |
|
PM 35000/TK |
35000 W tube FM transmitter composed of: KE 20, KF 1000, KA 35000. |
|
PM 35000/TLD |
35000 W tube FM transmitter composed of: KCL 30, KF 1000, KA 35000. |
|
|
OPTIONS FOR TUBE FM TRANSMITTERS |
|
/S |
High performance built-in
DIGITAL STEREO GENERATOR, stereo separation > 78 dB. For KE20, KCL 30, PM 120 , PM 300 , PM 500 , and all versions /TK and /TP and /TLD
only. |
|
/R2M |
Interface for remote
and telemetry of all main parameters. |
REMOTE, TELEMETRY, CHANGEOVER SYSTEMS
|
TM/RC 232 |
Remote control and telemetry
interface with direct PC (RS 232) connection to control & monitor the main parameters of the transmitter through telephonic
line, GSM or radio link. 8 digital inputs, 8 analog inputs, 8 on-off switches. Fully compatible with all standard telephonic
modems. PC software included. |
|
GM/08 |
GSM modem for remote
control and telemetry. |
|
RM/12 |
Modem for remote control
and telemetry via radio transceivers. |
|
ACO1/FM03 |
Automatic changeover
system for 1+1 operations. 0.3+0.3 kW. Includes RF switchers. |
|
ACO1/FM12 |
As above for 1.2+1.2
kW. |
|
ACO1/FM36 |
As above for 3.6+3.6
kW. |
|
ACO1/FM120 |
As above for 12+12 kW. |
|
ACO1/FM240 |
As above for 24+24 kW. |
|
ACO2/FM03 |
Automatic changeover
system for 2+1 operations. 0.3+0.3+0.3 kW. Includes RF switchers. |
|
ACO2/FM12 |
As above for 1.2+1.2+1.2
kW. |
|
ACO2/FM36 |
As above for 3.6+3.6+3.6
kW. |
|
ACO2/FM120 |
As above for 12+12+12
kW. |
|
ACO2/FM240 |
As above for 24+24+24
kW. |
|
NOTE: |
The above specifications
do not includes the dummy load. 3+1, 4+1 and 5+1 operations are available on request). |
COMPOSITE RADIO LINKS from 48 MHz to 2.7 GHz
|
NOTE: |
For a built-in stereo
generator see the options below. All the composite radio links are compatible with the digital codecs (see "coders/decoders
for digital links" section). |
|
|
48 - 80 MHz band |
|
TRP 15/1 |
Portable transmitter
with external frequency selector, 52-70 MHz, 0-15 W adjustable, 12 VDC, complete with mike and antenna. |
|
KE/1B |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 48±80 MHz. Agile frequency programmability. Output
power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control,
Vdc power supply. |
|
KV/1B |
Synthesized receiver,
48-80 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/1B |
Synthesized transposer.
Input: 48-1020 MHz. Out: 15 W in 48-80 MHz band. |
|
|
80 - 108 MHz band |
|
KV/FM |
Synthesized receiver,
80-108 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/FM |
Synthesized transposer.
Input: 48-1020 MHz. Out: 20 W in 87.5-108 MHz band. |
|
|
160 - 300 MHz band |
|
TRP 12/3 |
Portable transmitter
with external frequency selector, 172-250 MHz, 0-12 W adjustable, 12 VDC, complete with mike and antenna. |
|
KE/3B |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 160±300 MHz. Agile frequency programmability.
Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote
control, Vdc power supply. |
|
KV/3B |
Synthesized receiver,
160-300 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/3B |
Synthesized transposer.
Input: 48-1020 MHz. Out: 15 W in 160-300 MHz band. |
|
|
300 - 512 MHz band |
|
TRP 12/4 |
Portable transmitter
with external frequency selector, 250-512 MHz, 0-12 W adjustable, 12 VDC, complete with mike and antenna. |
|
KE/4B |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 300 ± 512 MHz. Agile frequency programmability.
Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote
control, Vdc power supply. |
|
KV/4B |
Synthesized receiver,
300-512 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/4B |
Synthesized transposer.
Input: 48-1020 MHz. Out: 15 W in 300-512 MHz band. |
|
|
512 - 830 MHz band |
|
TRP 8/5 |
Portable transmitter
with external frequency selector, 512-860 MHz, 0-8 W adjustable, 12 VDC, complete with mike and antenna. |
|
KE/5B |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 512 ± 830 MHz. Agile frequency programmability.
Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote
control, Vdc power supply. |
|
KV/5B |
Synthesized receiver,
512-830 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/5B |
Synthesized transposer.
Input: 48-1020 MHz. Out: 5 W in 512-830 MHz band. |
|
|
830 - 1020 MHz band |
|
TRP 8/G |
Portable transmitter
with external frequency selector, 860-1020 MHz, 0-8 W adjustable, 12 VDC, complete with mike and antenna. |
|
KE/G |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 830 ± 1020 MHz. Agile frequency programmability.
Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote
control, Vdc power supply. |
|
KV/G |
Synthesized receiver,
830-1020 MHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCV/GHz |
Synthesized transposer.
Input: 48-1020 MHz. Out: 8 W in 830-1020 MHz band. |
|
KN 25/GHz |
830-1020 MHz solid state
amplifier. 0-25 W out adjustable with 0-3 W input, broadband, fully protected. |
|
|
1.1 - 2.7 GHz band |
|
KE/2G |
STL transmitter for mono
or composite operations. Compatible with digital audio. Operating frequency: 1.1 ± 2.7 MHz. Agile frequency programmability.
Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote
control, Vdc power supply. |
|
KE5/2G |
As above with 5 W output
power. |
|
KN 25/2GHz |
1.1-2.7 MHz solid state
amplifier. 0-25 W out adjustable with 0-2 W input, broadband, fully protected. |
|
KV/2G |
Synthesized receiver,
1.1-2.7 GHz. Out: audio mono, MPX, IF 10.7 MHz. |
|
DCIF/2G |
Aural STL IF converter.
Input: IF 70 MHz, output: 2 W on 1500-2500 MHz band. |
|
DCIF5/2G |
Aural STL IF converter.
Input: IF 70 MHz, output: 5 W on 1500-2500 MHz band. |
|
|
OPTIONS FOR COMPOSITE
RADIO LINKS |
|
/S |
High performances (stereo
separation > 74 dB) built-in DIGITAL STEREO GENERATOR option for radio link transmitters (available for KE/ series only). |
|
/VDC |
12/24/48 Vdc power supply. |
MICROWAVE RADIO LINKS from 5.6 to 14.9 GHz
|
|
5.6 - 9.9 GHz COMPLETE
RADIO LINKS & TRANSPOSERS |
|
MRL8/02/06 |
5.6 - 9.9 GHz complete
radio link composed by: 0.2 W transmitter (FMT 8/02), receiver (FMR 8), IF modulator (MT 8), IF demodulator (MR 8), 2 x 0.6
mt parabolas (PAR06/8G). Capacity: 1 mono/stereo+RDS/digital channel. Options: 2nd/3rd audio channels (see below). |
|
MRL8/1/06 |
As above with FMT 8/1,
1 W output power transmitter. |
|
MRL8/4/06 |
As above with FMT 8/4,
4 W output power transmitter. |
|
MRL8/8/06 |
As above with FMT 8/8,
8 W output power transmitter. |
|
MTP8/02/06 |
5.6 - 9.9 GHz complete
transposer composed by: 0.2 W transmitter (FMT 8/02), receiver (FMR 8), 2 x 0.6 mt parabolas (PAR06/8G), RF cables, AL/HM
power supply module, and H/W accessories. |
|
MTP8/1/06 |
As above with FMT 8/1,
1 W output power transmitter. |
|
MTP8/4/06 |
As above with FMT 8/4,
4 W output power transmitter. |
|
MTP8/8/06 |
As above with FMT 8/8,
8 W output power transmitter. |
|
NOTE: |
For other parabolic antenna
sizes see the "radio link antennas" section. |
|
|
5.6 - 9.9 GHz CONVERTERS
from 900 - 1020 MHz |
|
HTC 8/01 |
Microwave converter-transmitter.
Input 900±1000 MHz, -5±+10 dBm, output 0.1 W on the 5.6 - 9.9 GHz band. Double output isolator for mismatching and devices
protection. IF reject. filter. Out connector: WR 90. Waterproof box for rear parabola installation. |
|
HTC 8/1 |
As above with 1 W output
power. |
|
HRC 8 |
Microwave converter-receiver.
Input 5.6 - 9.9 GHz antenna signal, output 900±1000 MHz, -45±-30 dBm. IF reject. filter. Input connector: WR 90. Input isolator
for mismatching and devices protection. Waterproof box for rear parabolic antenna installation. |
|
|
5.6 - 9.9 GHz RADIO
LINK PARTS |
|
MT 8 |
IF audio modulator for
FMT 8 transmitter. Synthesized, step 3.5 MHz. Output freq.: 1100±1135 MHz, band occ. 3.2 MHz. Capacity: 1 baseband channel
for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional, see AMT 2 option below). |
|
MR 8 |
IF audio demodulator
for FMR 8 receiver. Synthesized, step 3.5 MHz. Input freq.: 1100±1135 MHz, channel bandwith 3.2 MHz. Capacity: 1 to 3 mono/stereo
+ RDS audio channel + 1 HDB3 digital channel. Options: 2nd/3rd audio channel, IF 70 MHz (see below). |
|
FMT 8/02 |
Microwave transmitter.
Input IF 1100±1135 MHz, output 0.2 W on the 5.6 - 9.9 GHz. Waterproof box for rear parabolic antenna installation. Options:
high frequency stability, IF 70 MHz (see below). |
|
FMT 8/1 |
As above with 1 W output
power. |
|
FMT 8/4 |
As above with 4 W output
power. |
|
FMT 8/8 |
As above with 8 W output
power. |
|
FMR 8 |
Microwave receiver. Input
5.6 - 9.9 GHz antenna signal, output IF 1100÷1135 MHz. Waterproof box for rear parabolic antenna installation. Options: high
frequency stability, IF 70 MHz (see below). |
|
|
10.1 - 12.7 GHz RADIO
LINKS & TRANSPOSERS. |
|
MRL10/02/06 |
10.1 - 12.7 GHz complete
radio link composed by: 0.2 W transmitter (FMT 10/02), receiver (FMR 10), IF modulator (MT 10), IF demodulator (MR 10), 2
x 0.6 mt parabolas (PAR06/10G). Capacity: 1 mono/stereo+RDS/digital channel. Options: 2nd/3rd audio ch. (see below). |
|
MRL10/1/06 |
As above with 1 W output
power. |
|
MTP10/02/06 |
10.1 - 12.7 GHz complete
transposer composed by: 0.2 W transmitter (FMT 10/02), receiver (FMR 10), 2 parabolas (PAR06/10G), RF cables, AL/HM power
supply module, and H/W accessories. |
|
MTP10/1/06 |
As above with FMT 10/1,
1 W output power transmitter. |
|
NOTE: |
For others parabolic
antenna sizes see the "radio link antennas" section. |
|
|
10.1 - 12.7 GHz RADIO
LINKS PARTS. |
|
MT 10 |
IF audio modulator for
FMT 10 microwave transmitter. Capacity: 1 to 3 mono/stereo+RDS audio channel or digital channels. Synthesized output freq.:
1100±1400 MHz, steps 100 kHz. Options: 2nd/3rd audio channel, IF 70 MHz (see below). |
|
MR 10 |
IF audio demodulator
for FMR 10 receiver. Synthesized, step 100 kHz. Input freq.: 1100±1400 MHz. Capacity: 1 mono/stereo + RDS audio channel or
digital channel. Option: 2nd/3rd audio channel, IF 70 MHz (see below). |
|
FMT 10/02 |
Microwave transmitter.
Input IF 1100±1400 MHz, output 0.2 W on the 10.1 - 12.7 GHz band. Waterproof box for rear parabolic antenna installation.
Options: high frequency stability, IF 70 MHz (see below). |
|
FMT 10/1 |
As above with 1 W output
power. |
|
FMR 10 |
Microwave receiver. Input
10.1 - 12.7 GHz antenna signal, output IF 1100±1400 MHz band. Waterproof box for rear parabolic antenna installation. Options:
high frequency stability, IF 70 MHz (see below). |
|
|
12.8 - 14.9 GHz RADIO
LINKS & TRANSPOSERS. |
|
MRL14/02/06 |
12.8 - 14.9 GHz complete
radio link composed by: 0.2 W transmitter (FMT 10/02), receiver (FMR 10), IF modulator (MT 10), IF demodulator (MR 10), 2
parabolas (PAR06/10G). Capacity: 1 mono/stereo+RDS/digital channel. Options: 2nd/3rd audio ch. (see below). |
|
MRL14/1/06 |
As above with 1 W output
power. |
|
MTP14/02/06 |
12.8 - 14.9 GHz complete
transposer composed by: 0.2 W transmitter (FMT 10/02), receiver (FMR 10), 2 parabolas (PAR06/10G), RF cables, AL/HM power
supply module, and H/W accessories. |
|
MTP14/1/06 |
As above with FMT 10/1,
1 W output power transmitter. |
|
NOTE: |
For others parabolic
antenna sizes see the "radio link antennas" section. |
|
|
12.8 - 14.9 GHz RADIO
LINKS PARTS. |
|
MT 14 |
IF audio modulator for
FMT 10 microwave transmitter. Capacity: 1 to 3 mono/stereo+RDS audio channel or digital channels. Synthesized output freq.:
1100±1400 MHz, steps 100 kHz. Options: 2nd/3rd audio channel, IF 70 MHz (see below). |
|
MR 14 |
IF audio demodulator
for FMR 10 receiver. Synthesized, step 100 kHz. Input freq.: 1100±1400 MHz. Capacity: 1 mono/stereo + RDS audio channel or
digital channel. Option: 2nd/3rd audio channel, IF 70 MHz (see below). |
|
FMT 14/02 |
Microwave transmitter.
Input IF 1100±1400 MHz, output 0.2 W on the 12.8 - 14.9 GHz band. Waterproof box for rear parabolic antenna installation.
Options: high frequency stability, IF 70 MHz (see below). |
|
FMT 14/1 |
As above with 1 W output
power. |
|
FMR 14 |
Microwave receiver. Input
10.1 - 12.7 GHz antenna signal, output IF 1100±1400 MHz band. Waterproof box for rear parabolic antenna installation. Options:
high frequency stability, IF 70 MHz (see below). |
|
|
OPTIONS FOR MICROWAVE
LINKS. |
|
/S |
High performances (stereo
separation > 74 dB) built-in DIGITAL STEREO GENERATOR option for radio link transmitters (available for KE/ series
only). |
|
/VDC |
12/24/48 Vdc power supply. |
|
AMT 8 |
Each additional audio
channel for MT microwave transmitter. |
|
AMR 8 |
Each additional audio
channel for MR microwave receiver. |
|
MD 70 |
IF 70 MHz for MT, MR
IF modulators/demodulators. |
|
TR 70 |
IF 70 MHz for FMT, FMR,
microwave transmitters/receivers. |
|
HFS 10 |
Frequency stability >10
ppm for FMT and FMR microwave transmitters/receivers. |
|
HFS 05 |
Frequency stability >
5 ppm for FMT and FMR microwave transmitters/receivers. |
|
AL/HM |
110/220 Vac power supply
for microvawe receiver and transmitter when connected to rear parabolic antennas as transposer assembly. |
|
MM/REP |
Synthesized IF link repeater.
Input IF: 1000-1400 MHz, output IF: 1000-1400 MHz and 1 Video/1 Audio, 0 dBm. |
CODERS/DECODERS FOR DIGITAL RADIO LINKS
fully compatible with all our radio links
|
TD2/16 |
16-bit digital audio
coder. Input: 2 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 150 kHz channel bandwidth. |
|
T2/HD3 |
As above, with standard
HDB3 digital coding system. Compatible with all composite STL with a minimum 500 kHz channel bandwidth. |
|
RD2/16 |
16-bit digital audio
decoder. Output: 2 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 150 kHz channel
bandwidth. |
|
R2/HD3 |
As above, with standard
HDB3 digital coding system. Compatible with all composite STL with a minimum 500 kHz channel bandwidth. |
|
TD4/16 |
16-bit digital audio
coder. Input: 4 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 240 kHz channel bandwidth. |
|
T4/HD3 |
As above, with standard
HDB3 digital coding system. Compatible with all composite STL with a minimum 900 kHz channel bandwidth. |
|
RD4/16 |
16-bit digital audio
decoder. Output: 4 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 240 kHz channel
bandwidth. |
|
R4/HD3 |
As above, with standard
HDB3 digital coding system. Compatible with all composite STL with a minimum 900 kHz channel bandwidth. |
|
RPD/2 |
2 channels digital repeater.
Like RD2/16 or R2/HD3 with RD-RCS option but without audio channel outputs. |
|
RPD/4 |
4 channels digital repeater.
Like RD4/16 or R4/HD3 with RD-RCS option but without audio channel outputs. |
|
|
OPTIONS FOR DIGITAL
CODERS/DECODERS |
|
TD-DAC |
4.8 kbps data channel
interface for TD2/16, TD4/16, T2/HD3, T4/HD3. |
|
RD-DAC |
4.8 kbps data channel
interface for RD2/16, RD4/16, R2/HD3, R4/HD3. |
|
TD-RDS |
RDS and 4.8 kbps data
channel interface for TD2/16, TD4/16, T2/HD3, T4/HD3. |
|
RD-RDS |
RDS and 4.8 kbps data
channel interface for RD2/16, RD4/16, R2/HD3, R4/HD3. |
|
TD-AEBU |
AES/EBU interface for
TD2/16, TD4/16, T2/HD3, T4/HD3. |
|
RD-AEBU |
AES/EBU interface for
RD2/16 and RD2/16, RD4/16, R2/HD3, R4/HD3. |
|
RD-RCS |
Regenerated coded signal
output interface in RD/16 and R/HD3 for multi-hops STL. |
AUDIO EQUIPMENT & RDS
|
|
AUDIO PROCESSORS |
|
SAP 03 |
Stereo audio processor.
Settable AVG/PEAK program to optimize compression, expansion and limiting functions. Three sub-band operations. Professional
broadcast version. |
|
FLD-03 |
Digital audio processor.
Three sub-band operations. Includes PC software. |
|
FLD-03-S |
Digital audio processor.
Three sub-band operations. Includes built-in digital stereo generator and PC software. |
|
RD-FLD-03 |
Radio Data System (RDS)
optional board for FLD-03-S audio processor. |
|
FLD-05-SE |
Digital audio processor.
Five sub-band operations. Includes built-in stereo enhancer and PC software. |
|
|
STEREO CODERS, STEREO-ENHANCERS,
LIMITERS AND RDS CODERS |
|
RD-FLD-05 |
Radio Data System (RDS)
optional board for FLD-05-SE audio processor. |
|
LM-SE-02 |
Stereo enhancer, digital
stereo generator, MPX clipper, limiter and PC software. |
|
MOZART |
Digital stereo generator.
New "MSCTM technology for top quality audio. Superior stereo separation (> 78 dB) in the whole band (10
Hz ÷15 kHz). S/N > 84 dB. |
|
RDS-MZ03 |
Radio Data System (RDS)
option for Mozart-03 stereo generator. |
|
DBDS 232 |
Radio data system encoder
(RDS). Pylot synchro, programmable messages by PC and RS232 interface. All main functions and PC software included. |
|
SE-DS-L04 |
Digital stereo generator
with Radio Data System (RDS). Includes limiter, stereo-enhancer, MPX clipper and PC software. |
|
|
BROADCAST CONSOLES |
|
ACL-62-TM |
6x2 inputs complete audio
console with 2 telephone lines, loudspeaker monitor and microphone line. Without tones equalization. |
|
ACL-62-TM-TE |
6x2 inputs complete audio
console with 2 telephone lines, loudspeaker monitor and microphone line. Includes tones equalization. |
|
ACF-08 |
8 inputs frame for audio
console. Master/Sub, 4 V-meters. |
|
ACF-18 |
18 inputs frame for audio
console. Master/Sub, 4 V-meters. |
|
ACF-28 |
28 inputs frame for audio
console. Master/Sub, 4 V-meters. |
|
ACF-MML |
Micro/Line module. Mono,
without tono control. |
|
ACF-SLL |
Line/Line module. Stereo,
without tono control. |
|
ACF-SPL |
Phono/Line module. Stereo,
without tono control. |
|
ACF-TEL |
Interface for external
telephone hybrids. |
|
ACF-ITE |
Telephonic module with
built-in telephone hybrid. |
|
ACF-SCT |
10 units script tray. |
|
ACF-CMO |
Cover blank module. |
|
|
TELEPHONE HYBRIDS |
|
THY-01-02 |
1 line, 2 wires. |
|
THY-02-02 |
2 line, 2 wires. |
TRANSMITTING ANTENNAS ( 87.5 - 108 MHz )
|
|
OMNIDIRECTIONAL DIPOLES
- vertical/horizontal polarization |
|
D1 LB |
Aluminium omnidirectional
dipole, 12 MHz band, gain 2.15 dB, 800 W, N connector. Mounting clamps included. |
|
P1 N |
Anticorodal omnidirectional
dipole, 87.5-108 MHz broadband, 2.15 dB gain. N connector. Includes mounting clamps and stainless steel accessories. |
|
P1 LC |
Like P1 N, with LC connector. |
|
P1 7/16 |
Like P1 N, with 7/16"
connector. |
|
P1 7/8 |
Like P1 N, with 7/8"
connector. |
|
PX1 N |
Like P1 N, entirely stainless
steel. |
|
PX1 LC |
Like P1 LC, entirely
stainless steel. |
|
PX1 7/16 |
Like P1 7/16, entirely
stainless steel. |
|
PX1 7/8 |
Like P1 7/8, entirely
stainless steel. |
|
|
OMNIDIRECTIONAL -
circular polarization |
|
SC/N |
CIRCULAR polarization
omnidirectional antenna. 3 MHz band, gain -1.5 dB, N connector. Entirely stainless steel. Mounting clamps and accessories
included. |
|
OCS 716 |
CIRCULAR polarization
omnidirectional antenna. Broadband, gain -1.5 dB, detachable, 7/16" connector. Entirely stainless steel. Mounting clamps and
accessories included. |
|
OCS 78 |
Like OCS 716 with EIA
7/8" input connector. |
|
|
DIRECTIVES - vertical/horizontal
polarization |
|
D2 LB |
Aluminium 2-elements
semidirectional antenna, 4 MHz band, gain 4.2 dB, N connector. Mounting clamps included. |
|
D3 LB |
Aluminium 3-elements
directional antenna, 12 MHz band, gain 6.8 dB, N connector. Mounting clamps included. |
|
D4 LB |
Aluminium 4-elements
directional antenna, 12 MHz band, gain 7.8 dB, N connector. Mounting clamps included. |
|
AT 25/N |
5-elements logaritmic
directional. 80 - 110 MHz, broadband. Gain: 6 dBd. Power capability: 400 W. Vertical/horizontal polariz. N connector. Aluminum. |
|
P3 N |
Anticorodal 3-elements
directional antenna, 87.5-108 MHz broadband, 6.8 dB gain. N connector. Mounting clamps and stainless steel accessories. |
|
P3 LC |
Like P3 N, with LC connector. |
|
P3 7/16 |
Like P3 N, with 7/16"
connector. |
|
P3 7/8 |
Like P3 N, with 7/8"
connector. |
|
PX3 N |
Like P3 N, entirely stainless
steel. |
|
PX3 LC |
Like P3 LC, entirely
stainless steel. |
|
PX3 7/16 |
Like P3 7/16, entirely
stainless steel. |
|
PX3 7/8 |
Like P3 7/8, entirely
stainless steel. |
|
APFM/716 |
Panel antenna, 7.5 dB
gain, EIA 7/16" connector. |
|
APFM/78 |
Panel antenna, 7,5 dB
gain, EIA 7/8" connector. |
ANTENNA SPLITTERS ( 87.5 - 108 MHz )
|
ACS2 N-N |
2-way splitter, broadband,
N connectors, max power 600 W. |
|
ACS3 N-N |
3-way splitter, broadband,
N connectors, max power 600 W. |
|
ACS4 N-N |
4-way splitter, broadband,
N connectors, max power 600 W. |
|
ACS6NB N-N |
6-way splitter, 10 MHz
bandwidth, N connectors, max power 600 W. |
|
ACS6 N-N |
6-way splitter, broadband,
N connectors, max power 600 W. |
|
ACS8NB N-N |
8-way splitter, 8 MHz
bandwidth, N connectors, max power 600 W. |
|
ACS8 N-N |
8-way splitter, broadband,
N connectors, max power 600 W. |
|
ACS2 716-N |
2-way splitter, broadband,
7/16"-N connectors, max power 1200 W. |
|
ACS3 716-N |
3-way splitter, broadband,
7/16"-N connectors, max power 1500 W. |
|
ACS4 716-N |
4-way splitter, broadband,
7/16"-N connectors, max power 1500 W. |
|
ACS6NB 716-N |
6-way splitter, 10 MHz
bandwidth, 7/16"-N connectors, max power 1500 W. |
|
ACS6 716-N |
6-way splitter, broadband,
7/16"-N connectors, max power 1500 W. |
|
ACS8NB 716-N |
8-way splitter, 8 MHz
bandwidth, 7/16"-N connectors, max power 1500 W. |
|
ACS8 716-N |
8-way splitter, broadband,
7/16"-N connectors, max power 1500 W. |
|
ACS2 78-N |
2-way splitter, broadband,
7/8"-N connectors, max power 1200 W. |
|
ACS3 78-N |
3-way splitter, broadband,
7/8"-N connectors, max power 1800 W. |
|
ACS4 78-N |
4-way splitter, broadband,
7/8"-N connectors, max power 2400 W. |
|
ACS6NB 78-N |
6-way splitter, 10 MHz
bandwidth, 7/8"-N connectors, max power 3600 W. |
|
ACS6 78-N |
6-way splitter, broadband,
7/8"-N connectors, max power 3600 W. |
|
ACS8NB 78-N |
8-way splitter, 8 MHz
bandwidth, 7/8"-N connectors, max power 5000 W. |
|
ACS8 78-N |
8-way splitter, broadband,
7/8"-N connectors, max power 5000 W. |
|
ACS2 LC-N |
2-way splitter, broadband,
LC-N connectors, max power 2000 W. |
|
ACS3 LC-N |
3-way splitter, broadband,
LC-N connectors, max power 2000 W. |
|
ACS4 LC-N |
4-way splitter, broadband,
LC-N connectors, max power 2000 W. |
|
ACS6NB LC-N |
6-way splitter, 10 MHz
bandwidth, LC-N connectors, max power 2000 W. |
|
ACS6 LC-N |
6-way splitter, broadband,
LC-N connectors, max power 2000 W. |
|
ACS8NB LC-N |
8-way splitter, 8 MHz
bandwidth, LC-N connectors, max power 2000 W. |
|
ACS8 LC-N |
8-way splitter, broadband,
LC-N connectors, max power 2000 W. |
|
ACS2 716-716 |
2-way splitter, broadband,
7/16"-7/16" connectors, max power 1500 W. |
|
ACS3 716-716 |
3-way splitter, broadband,
7/16"-7/16" connectors, max power 1500 W. |
|
ACS4 716-716 |
4-way splitter, broadband,
7/16"-7/16" connectors, max power 1500 W. |
|
ACS6NB 716-716 |
6-way splitter, 10 MHz
bandwidth, 7/16"-7/16" connectors, max power 1500 W. |
|
ACS6 716-716 |
6-way splitter, broadband,
7/16"-7/16" connectors, max power 1500 W. |
|
ACS8NB 716-716 |
8-way splitter, 8 MHz
bandwidth, 7/16"-7/16" connectors, max power 1500 W. |
|
ACS8 716-716 |
8-way splitter, broadband,
7/16"-7/16" connectors, max power 1500 W. |
|
ACS2 78-716 |
2-way splitter, broadband,
7/8"-7/16" connectors, max power 2800 W. |
|
ACS3 78-716 |
3-way splitter, broadband,
7/8"-7/16" connectors, max power 4200 W. |
|
ACS4 78-716 |
4-way splitter, broadband,
7/8"-7/16" connectors, max power 5000 W. |
|
ACS6NB 78-716 |
6-way splitter, 10 MHz
bandwidth, 7/8"-7/16" connectors, max power 5000 W. |
|
ACS6 78-716 |
6-way splitter, broadband,
7/8"-7/16" connectors, max power 5000 W. |
|
ACS8NB 78-716 |
8-way splitter, 8 MHz
bandwidth, 7/8"-7/16" connectors, max power 5000 W. |
|
ACS8 78-716 |
8-way splitter, broadband,
7/8"-7/16" connectors, max power 5000 W. |
|
ACS4 158-716 |
4-way splitter, broadband,
1+5/8"-7/16" connectors, max power 5500 W. |
|
ACS6NB 158-716 |
6-way splitter, 10 MHz
bandwidth, 1+5/8"-7/16" connectors, max power 8000 W. |
|
ACS6 158-716 |
6-way splitter, broadband,
1+5/8"-7/16" connectors, max power 8000 W. |
|
ACS8NB 158-716 |
8-way splitter, 8 MHz
bandwidth, 1+5/8"-7/16" connectors, max power 11000 W. |
|
ACS8 158-716 |
8-way splitter, broadband,
1+5/8"-7/16" connectors, max power 11000 W. |
|
ACS2 LC-LC |
2-way splitter, broadband,
LC-LC connectors, max power 2000 W. |
|
ACS3 LC-LC |
3-way splitter, broadband,
LC-LC connectors, max power 2000 W. |
|
ACS4 LC-LC |
4-way splitter, broadband,
LC-LC connectors, max power 2000 W. |
|
ACS6NB LC-LC |
6-way splitter, 10 MHz
bandwidth, LC-LC connectors, max power 2000 W. |
|
ACS6 LC-LC |
6-way splitter, broadband,
LC-LC connectors, max power 2000 W. |
|
ACS8NB LC-LC |
8-way splitter, 8 MHz
bandwidth, LC-LC connectors, max power 2000 W. |
|
ACS8 LC-LC |
8-way splitter, broadband,
LC-LC connectors, max power 2000 W. |
|
ACS2 78-LC |
2-way splitter, broadband,
7/8"-LC connectors, max power 4000 W. |
|
ACS3 78-LC |
3-way splitter, broadband,
7/8"-LC connectors, max power 5000 W. |
|
ACS4 78-LC |
4-way splitter, broadband,
7/8"-LC connectors, max power 5000 W. |
|
ACS6NB 78-LC |
6-way splitter, 10 MHz
bandwidth, 7/8"-LC connectors, max power 5000 W. |
|
ACS6 78-LC |
6-way splitter, broadband,
7/8"-LC connectors, max power 5000 W. |
|
ACS8NB 78-LC |
8-way splitter, 8 MHz
bandwidth, 7/8"-LC connectors, max power 5000 W. |
|
ACS8 78-LC |
8-way splitter, broadband,
7/8"-LC connectors, max power 5000 W. |
|
ACS4 158-LC |
4-way splitter, broadband,
1+5/8"-LC connectors, max power 8000 W. |
|
ACS6NB 158-LC |
6-way splitter, 10 MHz
bandwidth, 1+5/8"-LC connectors, max power 14000 W. |
|
ACS6 158-LC |
6-way splitter, broadband,
1+5/8"-LC connectors, max power 14000 W. |
|
ACS8NB 158-LC |
8-way splitter, 8 MHz
bandwidth, 1+5/8"-LC connectors, max power 14000 W. |
|
ACS8 158-LC |
8-way splitter, broadband,
1+5/8"-LC connectors, max power 14000 W. |
|
ACS2 78-78 |
2-way splitter, broadband,
7/8"-7/8" connectors, max power 5000 W. |
|
ACS3 78-78 |
3-way splitter, broadband,
7/8"-7/8" connectors, max power 5000 W. |
|
ACS4 78-78 |
4-way splitter, broadband,
7/8"-7/8" connectors, max power 5000 W. |
|
ACS6NB 78-78 |
6-way splitter, 10 MHz
bandwidth, 7/8"-7/8" connectors, max power 5000 W. |
|
ACS6 78-78 |
6-way splitter, broadband,
7/8"-7/8" connectors, max power 5000 W. |
|
ACS8NB 78-78 |
8-way splitter, 8 MHz
bandwidth, 7/8"-7/8" connectors, max power 5000 W. |
|
ACS8 78-78 |
8-way splitter, broadband,
7/8"-7/8" connectors, max power 5000 W. |
|
ACS2 158-78 |
2-way splitter, broadband,
1+5/8"-7/8" connectors, max power 10000 W. |
|
ACS3 158-78 |
3-way splitter, broadband,
1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS4 158-78 |
4-way splitter, broadband,
1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS6NB 158-78 |
6-way splitter, 10 MHz
bandwidth, 1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS6 158-78 |
6-way splitter, broadband,
1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS8NB 158-78 |
8-way splitter, 8 MHz
bandwidth, 1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS8 158-78 |
8-way splitter, broadband,
1+5/8"-7/8" connectors, max power 14000 W. |
|
ACS4 318-78 |
4-way splitter, broadband,
3+1/8"-7/8" connectors, max power 20000 W. |
|
ACS6NB 318-78 |
6-way splitter, 10 MHz
bandwidth, 3+1/8"-7/8" connectors, max power 25000 W. |
|
ACS6 318-78 |
6-way splitter, broadband,
3+1/8"-7/8" connectors, max power 25000 W. |
|
ACS8NB 318-78 |
8-way splitter, 8 MHz
bandwidth, 3+1/8"-7/8" connectors, max power 25000 W. |
|
ACS8 318-78 |
8-way splitter, broadband,
3+1/8"-7/8" connectors, max power 25000 W. |
|
ACS2 158-158 |
2-way splitter, broadband,
1+5/8"-1+5/8" connectors, max power 14000 W. |
|
ACS3 158-158 |
3-way splitter, broadband,
1+5/8"-1+5/8" connectors, max power 14000 W. |
|
ACS4 158-158 |
4-way splitter, broadband,
1+5/8"-1+5/8" connectors, max power 14000 W. |
|
ACS2 158-158 |
2-way splitter, broadband,
3+1/8"-1+5/8" connectors, max power 25000 W. |
|
ACS3 158-158 |
3-way splitter, broadband,
3+1/8"-1+5/8" connectors, max power 25000 W. |
|
ACS4 158-158 |
4-way splitter, broadband,
3+1/8"-1+5/8" connectors, max power 25000 W. |
|
ACS2 318-318 |
2-way splitter, broadband,
3+1/8"-3+1/8" connectors, max power 25000 W. |
CALIBRATED COUPLING CABLES FOR ANTENNA SYSTEMS
optimized by our antenna systems CAD
|
NOTE: |
All the below coupling
cables are optimized for standard tacked-arrays antenna systems with vertical polarization. For other array systems or customized
patterns please contact our technical Dpt. (e-mail: tech@dbbroadcast.com) |
|
CAV 2 |
Coupling cable for antenna
system. RG 213/50 W, N connector, 2 mt. |
|
CAV 3 |
Coupling cable for 2
bays antenna system. RG 213/50 W,
N connector, 3 mt. |
|
CAV 5,5 |
Coupling cable for 4
bays antenna system. RG 213/50 W,
N connector, 5.5 mt. |
|
CAV 7,5 |
Coupling cable for 6
bays antenna system. RG 213/50 W,
N connector, 7.5 mt. |
|
CAV 9,5 |
Coupling cable for 8
bays antenna system. RG 213/50 W,
N connector, 9.5 mt. |
|
CAV 2 1/4 N |
Coupling cable for 2
bays antenna system. Cellflex 1/4"/50 W,
N connector, 2 mt. |
|
CAV 3 1/4 N |
Coupling cable for 2
bays antenna system. Cellflex 1/4"/50 W,
N connector, 3 mt. |
|
CAV 5,5 1/4 N |
Coupling cable for 4
bays antenna system. Cellflex 1/4"/50 W, N connector, 5.5 mt. |
|
CAV 7,5 1/4 N |
Coupling cable for 6
bays antenna system. Cellflex 1/4"/50 W,
N connector, 7.5 mt. |
|
CAV 9,5 1/4 N |
Coupling cable for 8
bays antenna system. Cellflex 1/4"/50 W,
N connector, 9.5 mt. |
|
CAV 2 1/2 N |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
N connector, 2 mt. |
|
CAV 3 1/2 N |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
N connector, 3 mt. |
|
CAV 5,5 1/2 N |
Coupling cable for 4
bays antenna system. Cellflex 1/2"/50 W,
N connector, 5.5 mt. |
|
CAV 7,5 1/2 N |
Coupling cable for 6
bays antenna system. Cellflex 1/2"/50 W,
N connector, 7.5 mt. |
|
CAV 9,5 1/2 N |
Coupling cable for 8
bays antenna system. Cellflex 1/2"/50 W,
N connector, 9.5 mt. |
|
CAV 2 1/2 LC |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
LC connector, 2 mt. |
|
CAV 3 1/2 LC |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
LC connector, 3 mt. |
|
CAV 5,5 1/2 LC |
Coupling cable for 4
bays antenna system. Cellflex 1/2"/50 W,
LC connector, 5.5 mt. |
|
CAV 7,5 1/2 LC |
Coupling cable for 6
bays antenna system. Cellflex 1/2"/50 W,
LC connector, 7.5 mt. |
|
CAV 9,5 1/2 LC |
Coupling cable for 8
bays antenna system. Cellflex 1/2"/50 W,
LC connector, 9.5 mt. |
|
CAV 2 1/2 7/16 |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/16" connector, 2 mt. |
|
CAV 3 1/2 7/16 |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/16" connector, 3 mt. |
|
CAV 5,5 1/2 7/16 |
Coupling cable for 4
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/16" connector, 5.5 mt. |
|
CAV 7,5 1/2 7/16 |
Coupling cable for 6
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/16" connector, 7.5 mt. |
|
CAV 9,5 1/2 7/16 |
Coupling cable for 8
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/16" connector, 9.5 mt. |
|
CAV 2 1/2 7/8 |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/8" connector, 2 mt. |
|
CAV 3 1/2 7/8 |
Coupling cable for 2
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/8" connector, 3 mt. |
|
CAV 5,5 1/2 7/8 |
Coupling cable for 4
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/8" connector, 5.5 mt. |
|
CAV 7,5 1/2 7/8 |
Coupling cable for 6
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/8" connector, 7.5 mt. |
|
CAV 9,5 1/2 7/8 |
Coupling cable for 8
bays antenna system. Cellflex 1/2"/50 W,
EIA 7/8" connector, 9.5 mt. |
|
CAV 2 7/8 7/8 |
Coupling cable for 2
bays antenna system. Cellflex 7/8", EIA 7/8" connector, 2 mt. |
|
CAV 3 7/8 7/8 |
Coupling cable for 2
bays antenna system. Cellflex 7/8", EIA 7/8" connector, 3 mt. |
|
CAV 5,5 7/8 7/8 |
Coupling cable for 4
bays antenna system. Cellflex 7/8", EIA 7/8" connector, 5.5 mt. |
|
CAV 7,5 7/8 7/8 |
Coupling cable for 6
bays antenna system. Cellflex 7/8", EIA 7/8" connector, 7.5 mt. |
|
CAV 9,5 7/8 7/8 |
Coupling cable for 8
bays antenna system. Cellflex 7/8", EIA 7/8" connector, 9.5 mt. |
|
CAV 2 158 158 |
Coupling cable for 2
bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 2 mt. |
|
CAV 3 158 158 |
Coupling cable for 2
bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 3 mt. |
|
CAV 5,5 158 158 |
Coupling cable for 4
bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 5.5 mt. |
|
CAV 7,5 158 158 |
Coupling cable for 6
bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 7.5 mt. |
|
CAV 9,5 158 158 |
Coupling cable for 8
bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 9.5 mt. |
RADIO LINK ANTENNAS from 45 MHz to 14.9 GHz
|
D3/1B |
52-68 MHz directional,
gain 8.3 dB, 3 MHz band. |
|
LOG/1B |
45-81 MHz, broadband,
gain 6 dB. Logarithmic. Aluminium, N connector. |
|
LOG/FM |
87.5-108 MHz, broadband,
gain 9.4 dB. Logarithmic. Aluminium, N connector. |
|
LOG/3B |
174-300 MHz, gain 9.4
dB, broadband. * |
|
LOG/4B |
300-500 MHz, gain 10.6
dB, broadband. |
|
LOG/5B |
470-860 MHz, gain 11.4
dB, broadband. |
|
LOG/G |
800-1020 MHz, gain 11.6
dB, broadband. |
|
LOG/1.5G |
1-1.6 GHz, broadband,
gain 12 dB. Logarithmic. Aluminium, N connector. |
|
LOG/008-1.3G |
87 MHz-1.3 GHz, broadband,
gain 5 dB. Logarithmic. Aluminium, N connector. |
|
PAR0.6/G |
830-1020 MHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 13 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/G |
As above with 100 cm
diameter and gain 17 dB. |
|
PAR1.2/G |
As above with 120 cm
diameter and gain 18 dB. |
|
PAR1.5/G |
As above with 150 cm
diameter and gain 20 dB. |
|
PAR1.8/G |
As above with 180 cm
diameter and gain 22 dB. |
|
LOG/1.8G |
1.65-1.8 GHz, gain 12.4
dB, broadband. |
|
LOG/1.8GR |
1.65-1.8 GHz, gain 12.4
dB, broadband, waterproof radome included. |
|
LOG/2.7G |
1.8-2.6 GHz, gain 12.4
dB, broadband. |
|
LOG/2.7GR |
1.8-2.6 GHz, gain 12.4
dB, broadband, waterproof radome included. |
|
PAR0.6/2G |
1.1-2.7 GHz parabolic
antenna.1 mt diameter aluminium dish. Gain at center frequency: 18.5 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/2G |
As above with 100 cm
diameter and gain 22 dB. |
|
PAR1.2/2G |
As above with 120 cm
diameter and gain 24 dB. |
|
PAR1.5/2G |
As above with 150 cm
diameter and gain 27 dB. |
|
PAR1.8/2G |
As above with 180 cm
diameter and gain 28 dB. |
|
PAR06/8G |
5.6-9.9 GHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 31 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/8G |
As above with 100 cm
diameter and gain 36 dB. |
|
PAR1.2/8G |
As above with 120 cm
diameter and gain 38 dB. |
|
PAR1.5/8G |
As above with 150 cm
diameter and gain 40 dB. |
|
PAR1.8/8G |
As above with 180 cm
diameter and gain 41 dB. |
|
PAR06/10G |
10.1-12.7 GHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/10G |
As above with 100 cm
diameter and gain 37 dB. |
|
PAR1.2/10G |
As above with 120 cm
diameter and gain 39 dB. |
|
PAR1.5/10G |
As above with 150 cm
diameter and gain 41 dB. |
|
PAR1.8/10G |
As above with 180 cm
diameter and gain 42 dB. |
|
PAR06/14G |
12.8-14.9 GHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/14G |
As above with 100 cm
diameter and gain 37 dB. |
|
PAR1.2/14G |
As above with 120 cm
diameter and gain 39 dB. |
|
PAR1.5/14G |
As above with 150 cm
diameter and gain 41 dB. |
|
PAR1.8/14G |
As above with 180 cm
diameter and gain 42 dB. |
|
PAR06/17G |
14.9-17.8 GHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 37.5 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/17G |
As above with 100 cm
diameter and gain 42 dB. |
|
PAR1.2/17G |
As above with 120 cm
diameter and gain 43.4 dB. |
|
PAR1.5/17G |
As above with 150 cm
diameter and gain 45.3 dB. |
|
PAR1.8/17G |
As above with 180 cm
diameter and gain 47 dB. |
|
PAR06/23G |
21.8-23.7 GHz parabolic
antenna. 60 cm diameter aluminium dish. Gain at center frequency: 38.8 dB. Input connector: N. Illuminator, support with H/V
micrometric adjustement, mounting clamps and stainless steel accessories included. |
|
PAR1/23G |
As above with 100 cm
diameter and gain 43.2 dB. |
|
PAR1.2/23G |
As above with 120 cm
diameter and gain 44.5 dB. |
|
PAR1.5/23G |
As above with 150 cm
diameter and gain 46.3 dB. |
|
PAR1.8/23G |
As above with 180 cm
diameter and gain 48.1 dB. |
|
|
OPTIONS FOR MICROWAVE
PARABOLIC ANTENNAS. |
|
RAD 06 |
Fiberglass radome for
PAR06. |
|
RAD 1.0 |
Fiberglass radome for
PAR1. |
|
RAD 1.2 |
Fiberglass radome for
PAR1.2. |
|
RAD 1.5 |
Fiberglass radome for
PAR1.5. |
|
RAD 1.8 |
Fiberglass radome for
PAR1.8. |
COMBINING FILTERS (87.5 - 108 MHz) more transmitters in the same antenna
|
ADS2/1 |
Two transmitters selective
combining filter. 3 dB couplers and cavity system. Max pwr 0.8+0.8 kW. Freq. spacing: > 2 MHz. In/out conn: 7/8". |
|
ADS2/2 |
Two transmitters selective
combining filter. 3 dB couplers and cavity system. Max pwr 2+2 kW. Freq. spacing: > 2 MHz. In/out conn: 7/8". |
|
ADS2/5 |
Two transmitters selective
combining filter. 3 dB couplers and cavity system. Max pwr 5+5 kW. Freq. spacing: > 2 MHz. In/out conn: 7/8"-1+5/8". |
|
CDS2/0.5 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 0.5+0.5 kW. Freq. spacing: > 2 MHz. In/out conn: N - LC. |
|
CDS2/10 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 1+1 kW. Freq. spacing: > 2 MHz. In/out conn: LC - EIA 7/8" (others
upon request). |
|
CDS2/20 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 2+2 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 7/8". |
|
CDS2/50 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 5+5 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 7/8" - EIA 1+5/8". |
|
CDS2/100 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 10+10 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 1 5/8". |
|
CDS2/200 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 20+20 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 3 1/8". |
|
CDS2/300 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 30+30 kW. Freq. spacing: > 2 MHz. Inputt conn: EIA 3 1/8". |
|
CDS3/0.5 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 3 x 0.5 kW. Freq. spacing: > 3 MHz. In/out conn: N - LC (others upon
request). |
|
CDS3/10 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 1+1+1 kW. Freq. spacing: > 3 MHz. In/out conn: LC - EIA 7/8" (others
upon request). |
|
CDS3/20 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 2+2+2 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 7/8" - EIA 1 5/8". |
|
CDS3/50 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 5+5+5 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 7/8" - EIA 1 5/8". |
|
CDS3/100 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 10+10+10 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 1 5/8" - EIA
3 1/8". |
|
CDS3/200 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 20+20+20 kW. Freq. spacing: > 4 MHz. Input conn: EIA 3 1/8". |
|
CDS3/300 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 30+30+30 kW. Freq. spacing: > 4 MHz. Input conn: EIA 3 1/8". |
COMBINING FILTERS (400 - 1000 MHz)
|
SPU2/300 |
Two transmitters combining
filter. Star point and cavity system. Max pwr 300+300 W. Freq. spacing: > 16 MHz. In/out conn: N. |
|
SPU3/300 |
Three transmitters combining
filter. Star point and cavity system. Max pwr 300+300+300 W. Freq. spacing: > 18 MHz. In/out conn: N. |
BAND PASS CAVITY FILTERS
|
CFM2/05 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.12 dB. Max pwr: 0.5 kW. In/Out connectors: N (others upon request). |
|
CFM2/10 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 1 kW. In/Out connectors: LC (others upon request). |
|
CFM2/20 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 2 kW. In/Out connectors: EIA 7/8" (others upon request). |
|
CFM2/50 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 5 kW. In/Out connectors: EIA 7/8" (others upon request). |
|
CFM2/100 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 10 kW. In/Out connectors: EIA 1 5/8" (others upon request). |
|
CFM2/200 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 20 kW. In/Out connectors: EIA 3 1/8" (others upon request). |
|
CFM2/300 |
Two cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 30 kW. In/Out connectors: EIA 3 1/8" (others upon request). |
|
CFM3/0.5 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 0.5 kW. In/Out connectors: N (others upon request). |
|
CFM3/10 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 1 kW. In/Out connectors: LC (others upon request). |
|
CFM3/20 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 2 kW. In/Out connectors: EIA 7/8" (others upon request). |
|
CFM3/50 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 5 kW. In/Out connectors: EIA 7/8" (others upon request). |
|
CFM3/100 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 10 kW. In/Out connectors: EIA 1 5/8" (others upon request). |
|
CFM3/200 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 20 kW. In/Out connectors: EIA 3 1/8" (others upon request). |
|
CFM3/300 |
Three cavity highQ bandpass
filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 30 kW. In/Out connectors: EIA 3 1/8" (others upon request). |
|
SC/300 |
Single cavity highQ bandpass
filter. 400-1000 MHz. Insert. losses < 0.18 dB. Max pwr: 300 W. In/Out connectors: N (others upon request). |
- 3 dB DIRECTIONAL COUPLERS (87.5 - 108 MHz)
|
ADI 1000 |
3 dB directional coupler.
Max power for each gate: 1 kW. In/out conn.: LC. |
|
ADI 3000 |
3 dB directional coupler.
Max power for each gate: 1.8 kW. In/out conn.: 7/8". |
AUTOMATIC VOLTAGE REGULATORS
|
|
Electromechanicals |
|
STM 1/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 1 kVA. |
|
STM 2.5/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 2.5 kVA. |
|
STM 5/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 5 kVA. |
|
STM 7/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 7 kVA. |
|
STM 15/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 15 kVA. |
|
STM 20/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 20 kVA. |
|
STM 35/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 35 kVA. |
|
STM 50/E |
Single-phase voltage
regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 50 kVA. |
|
STT 5/E |
Three-phases voltage
regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA. |
|
STT 10/E |
Three-phases voltage
regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA. |
|
STT 15/E |
Three-phases voltage
regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA. |
|
STT 20/E |
Three-phases voltage
regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 20 kVA. |
|
STT 30/E |
Three-phases voltage
regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 35 kVA. |
|
STT 50/E |
Three-phases voltage
regulat.(voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA. |
|
STT 75/E |
Three-phases voltage
regulat.(voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA. |
|
STY 5/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA. |
|
STY 10/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA. |
|
STY 15/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 15 kVA. |
|
STY 20/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 20 kVA. |
|
STY 30/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 30 kVA. |
|
STY 50/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA. |
|
STY 75/E |
Three-phases voltage
regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 75 kVA. |
|
|
Statics |
|
SSM/05 |
Single-phase static voltage
regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 500 VA. |
|
SSM/10 |
Single-phase static voltage
regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 1 kVA. |
|
SSM/20 |
Single-phase static voltage
regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 2 kVA. |
|
SSM/40 |
Single-phase static voltage
regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 4 kVA. |
PARTS FOR SURGE
and LIGHTNING PROTECTION SYSTEMS
|
|
In order to prevent transmitters'
power supplies damages caused by mains surges or lightning, it is recommended to use a surge voltage or/and lightning protector
better if coupled with an insulation transformer installed immediately down-line of the mains entrance or before the transmitter
to be protected. |
|
LP/22 |
110/220/240 Vac Single-phase
lightning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance. |
|
LP/38 |
220/380/415 Vac three-phases
lightning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance. |
|
SA/22M |
110/220/240 Vac Single-phase
surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance. |
|
SA/38T |
220/380/415 Vac three-phases
surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance. |
|
TSM05/11 |
Insulation transformer,
110/110 Vac single-phase, 500 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM05/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 500 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TSM10/11 |
Insulation transformer,
110/110 Vac single-phase, 1000 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM10/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 1000 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TSM20/11 |
Insulation transformer,
110/110 Vac single-phase, 2 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM20/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 2 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TSM30/11 |
Insulation transformer,
110/110 Vac single-phase, 3 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM30/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 3 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TSM50/11 |
Insulation transformer,
110/110 Vac single-phase, 5 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM50/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 5 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TSM100/11 |
Insulation transformer,
110/110 Vac single-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings. |
|
TSM100/22 |
Insulation transformer,
220/220 or 240/240 Vac single-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST80/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 8 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST80/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 8 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST100/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST100/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST150/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 15 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST150/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 15 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST200/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 20 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST200/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 20 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST300/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 30 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST300/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 30 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST400/22 |
Insulation transformer,
220/220 or 240/240 Vac three-phases, 40 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
TST400/38 |
Insulation transformer,
380/380 or 415/415 Vac three-phases, 40 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between
the windings. |
|
|
Cabinets for surge and lightning protection
systems |
|
|
To be placed under the
transmitter or immediately down-line of the mains entrance. |
|
CSL/03 |
Standard cabinet to contain
surge voltage or/and lightning protectors and insulation transformer up to 3 kVA. |
|
CSL/05 |
Standard cabinet to contain
surge voltage or/and lightning protectors and insulation transformer up to 5 kVA. |
|
CSL/15 |
Standard cabinet to contain
surge voltage or/and lightning protectors and insulation transformer up to 15 kVA. |
|
CSL/30 |
Standard cabinet to contain
surge voltage or/and lightning protectors and insulation transformer up to 30 kVA. |
|
CSL/40 |
Standard cabinet to contain
surge voltage or/and lightning protectors and insulation transformer up to 40 kVA. |
|
