DB TV Broadcast Equipments

IF MODULATORS

VAM 01/DV AUDIO-VIDEO/IF modulator. Multistandard. Digital video quality. Precision back-pork clamping. Audio carrier locked by PLL to line frequency. ALC video. High performances SAW filter.

VAM 01/DV-L Like VAM 01 for L standard.

CVM/IF AUDIO-VIDEO/IF modulator. A/V input, IF output. Plug-in module to use with IFC converters. See below to obtain compacts transmitters.

OPTIONS for VAM 01/DV
/SDG Dual sound/stereo board.

/DS 2nd audio carrier card for dual sound.

/VDC-VM 24 VDC power supply for battery or solar cells operations.

IF to CHANNEL CONVERTERS

IFCI/2 Output power 2 Wps. Band I, 45 - 90 MHz, synthesized. Linearity precorrector included. Pluggable modular system.

IFCI/5 As above with 5 W output power.

IFCI/10 As above with 10 W output power.

IFCV/2 Output power 2 Wps. Band III, 174 - 230 MHz, synthesized. Linearity precorrector included. Pluggable modular system.

IFCV/5 As above with 5 W output power.

IFCV/10 As above with 10 W output power.

IFCU/2 Output power 2 Wps. Band IV/V, 470 - 860 MHz, synthesized. Linearity precorrector included. Pluggable modular system.

IFCU/5 As above with 5 W output power.

IFCU/10 As above with 10 W output power.

OPTIONS for IFC.
VDC-IFC 24 VDC, battery or solar cells power supply .

HSF/IFC 0.3 ppm frequency stability.

OP/IFC Precision offset.

CHANNEL to IF CONVERTERS

CIF Synthesized Channel-IF converter. I-III-IV-V band. IF out. Pluggable modular system.

OPTIONS for CIF.
VDC-CIF 24 VDC, battery or solar cells power supply .

HSF/CIF 0.3 ppm frequency stability.

OP/CIF Precision offset.

LOW POWER TRANSPOSERS - digital

CCI/2 Input channel in band I-III-IV/V. Output channel in band I. Output power 2 Wps. Synthesized. Linearity precorrector included. Pluggable modular system.

CCI/5 As above with 5 W output power.

CCI/10 As above with 10 W output power.

CCV/2 Input channel in band I-III-IV/V. Output channel in band III, 174 - 230 MHz. Output power 2 Wps. Synthesized. Linearity precorrector included. Pluggable modular system.

CCV/5 As above with 5 W output power.

CCV/10 As above with 10 W output power.

CCU/2 Input channel in band I-III-IV/V. Output channel in band IV/V, 470 - 860 MHz. Output power 1 Wps. Synthesized. Linearity precorrector included. Pluggable modular system.

CCU/5 As above with 5 W output power.

CCU/10 As above with 10 W output power.

OPTIONS for CC
VDC-CC 24 VDC, battery or solar cells power supply.

HSF/CC High frequency stability.

OP/CC Precision offset.

SOLID STATE AMPLIFIERS - digital ready

BJT technology.

KSI 10 Output 10 Wps. Input 2 Wps. Class-A, broadband. Band I. Output notch filter not included (see option below).

KSV 10 As above for band III.

KSU 10 As above for band IV/V.

KSI 25 Output 25 Wps. Input 4 Wps. Class-A, broadband. Band I. Output notch filter not included (see option below).

KSV 25 As above for band III.

KSU 25 As above for band IV/V.

KSI 50 Output 50 Wps. Input 5 Wps. Class-A, broadband. Band I. Output notch filter not included (see option below).

KSV 50 As above for band III.

KSU 50 As above for band IV/V.

KSI 100 Output 100 Wps. Input 5 Wps. Class-A, broadband. Band I. Notch filter and 19" cabinet included.

KSV 100 Output 100 Wps. Input 5 Wps. Class-A, broadband. Band III. Notch filter and 19" cabinet included.

KSU 100 Output 100 Wps. Input 5 Wps. Class-A, broadband. Band IV/V. Notch filter and 19" cabinet included.

KBI 150 Output 150 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 150 As above for band III.

KBU 150 As above for band IV/V.

KBI 250 Output 250 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 250 As above for band III.

KBU 250 As above for band IV/V.

KBI 500 Output 500 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 500 As above for band III.

KBU 500 As above for band IV/V.

KBI 1000 Output 1000 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 1000 As above for band III.

KBU 1000 As above for band IV/V.

KBI 2000 Output 2000 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 2000 As above for band III.

KBU 2000 As above for band IV/V.

KBI 3000 Output 3000 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 3000 As above for band III.

KBU 3000 As above for band IV/V.

KBI 5000 Output 5000 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 5000 As above for band III.

KBU 5000 As above for band IV/V.

KBI 10000 Output 10000 Wps. Input 5 Wps. Class-AB, Band I, broadband. Cabinet, notch and band-pass filters included.

KBV 10000 As above for band III.

KBU 10000 As above for band IV/V.

New LD-MOS technology.

KD/280 Output 280 Wps. Input 5 Wps. Band IV/V, broadband. Cabinet, notch and band-pass filters included.

KD/500 As above with 5 Wps input and 550 Wps output.

KD/1000 As above with 5 Wps input and 1050 Wps output.

KD/1500 As above with 5 Wps input and 1600 Wps output.

KD/2000 As above with 5 Wps input and 2200 Wps output.

KD/3000 As above with 5 Wps input and 3000 Wps output.

KD/4000 As above with 5 Wps input and 4200 Wps output.

KD/5000 As above with 5 Wps input and 5500 Wps output.

KD/10000 As above with 5 Wps input and 10.5 kWps output.

KD/12000 As above with 5 Wps input and 12 kWps output.

KD/20000 As above with 5 Wps input and 20 kWps output.

OPTIONS FOR SOLID STATE AMPLIFIERS
FNI 5/02 5 poles notch filter. Band I, 45 - 90 MHz. Maximum power capacity: 150 W ps.

FNV 5/02 5 poles notch filter. Band III, 174 - 230 MHz. Maximum power capacity: 150 W ps.

FNU 5/02 5 poles notch filter. Band IV/V, 470 - 860 MHz. Max. power capacity: 150 W ps.

RK 19-5U "19" x 5U standard cabinet for KS series low power amplifiers, VAM01/DV modulator and IFCU converters.

SOLID STATE TRANSMITTERS/TRANSPOSERS - digital ready

Note: All the following TV transmitters/ transposers are digital upgradable with DK-KB kits. Please contact our commercial dpt for characteristics, prices and availability: phone ++39 049 8700588, e-mail: sales@dbbroadcast.com

Bjt Transmitters

MTI 2/S 2 Wps, I band , composed of: VAM 01/DV, IFCI/2,. Notch filter and cabinet not included (see above "Options for Solid State Amplifiers)

MTV 2/S As above for band III.

MTU 2/S As above for band IV/V.

MTI 5/S 5 Wps, I band , composed of: VAM 01/DV, IFCI/5,. Notch filter and cabinet not included (see above "Options for Solid State Amplifiers)

MTV 5/S As above for band III.

MTU 5/S As above for band IV/V.

MTI 10/S 10 Wps, I band , composed of: VAM 01/DV, IFCI/5, KSI 10, notch filter, 19" cabinet

MTV 10/S As above for band III.

MTU 10/S As above for band IV/V.

MTI 25/S 25 Wps, I band , composed of: VAM 01/DV, IFCI/5, KSI 25, notch filter, 19" cabinet

MTV 25/S As above for band III.

MTU 25/S As above for band IV/V.

MTI 50/S 50 Wps, I band , composed of: VAM 01/DV, IFCI/5, KSI 50, notch filter, 19" cabinet

MTV 50/S As above for band III.

MTU 50/S As above for band IV/V.

MTI 100/S 100 Wps, I band , composed of: VAM 01/DV, IFCI/5, KSI 100, notch filter, 19" cabinet

MTV 100/S As above for band III.

MTU 100/S As above for band IV/V.

MTI 150/S 150 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 150, cabinet notch/band-pass filters.

MTV 150/S As above for band III.

MTU 150/S As above for band IV/V.

MTI 250/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 250, cabinet notch/band-pass filters.

MTV 250/S As above for band III.

MTU 250/S As above for band IV/V.

MTI 500/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 500, cabinet notch/band-pass filters.

MTV 500/S As above for band III.

MTU 500/S As above for band IV/V.

MTI 1000/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 1000, cabinet notch/band-pass filters.

MTV 1000/S As above for band III.

MTU 1000/S As above for band IV/V.

MTI 2000/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 2000, cabinet notch/band-pass filters.

MTV 2000/S As above for band III.

MTU 2000/S As above for band IV/V.

MTI 3000/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 3000, cabinet notch/band-pass filters.

MTV 3000/S As above for band III.

MTU 3000/S As above for band IV/V.

MTI 5000/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 5000, cabinet notch/band-pass filters.

MTV 5000/S As above for band III.

MTU 5000/S As above for band IV/V.

MTI 10000/S 250 Wps, I band , composed of: VAM 01/DV, IFCI/5, KBI 10000, cabinet notch/band-pass filters.

MTV 10000/S As above for band III.

MTU 10000/S As above for band IV/V.

LD-MOS Transmitters
MD/280 Output 280 Wps. Band IV/V, broadband. Composed of: VAM 01/DV modulator, IFCI/5 converter, KD/280 amplifier, cabinet, output notch/band-pass filters.

MD/500 As above with 550 Wps output.

MD/1000 As above with 1050 Wps output.

MD/1500 As above with 1600 Wps output.

MD/2000 As above with 2200 Wps output.

MD/3000 As above with 3000 Wps output.

MD/4000 As above with 4200 Wps output.

MD/5000 As above with 5500 Wps output.

MD/10000 As above with 10.5 kWps output.

MD/12000 As above with 12 kWps output.

MD/20000 As above with 20 kWps output.

Transposers

Transposer's configurations can be obtained from above transmitters by replacing the VAM 01/DV modulator and the IFC/5 converter with CC/5 channel to channel converter.

Analog to digital television conversion kits for above.

COMPACT SOLID STATE TRANSMITTERS/TRANSPOSERS - digital ready

Note: for the transmitters listed below without output filter see above "Options for Solid State Amplifiers" section.

CTI/2 2 Wps output, Band I, synthesized. A/V input. Composed by CVM/IF plug-in A/V-IF modulator and IFCI/2 IF to channel converter. Output filter not included.

CTV/2 As above for Band III.

CTU/2 As above for Band IV/V.

CTI/5 5 Wps output, Band I, synthesized. A/V input. Composed by CVM/IF plug-in A/V-IF modulator and IFCI/5 IF to channel converter. Output filter not included.

CTV/5 As above for Band III.

CTU/5 As above for Band IV/V.

CTI/10 10 Wps output, Band I, synthesized. A/V input. Composed by CVM/IF plug-in A/V-IF modulator and IFCI/10 IF to channel converter. Output filter not included.

CTV/10 As above for Band III.

CTU/10 As above for Band IV/V.

CTI/25 25 Wps output, Band I, synthesized. A/V input. Output filter not included.

CTV/25 As above for Band III.

CTU/25 As above for Band IV/V.

CTI/50 50 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/50 As above for Band III.

CTU/50 As above for Band IV/V.

CTI/100 100 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/100 As above for Band III.

CTU/100 As above for Band IV/V.

CTI/150 150 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/150 As above for Band III.

CTU/150 As above for Band IV/V.

CTI/250 250 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/250 As above for Band III.

CTU/250 As above for Band IV/V.

CTI/500 500 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/500 As above for Band III.

CTU/500 As above for Band IV/V.

CTI/1000 1000 Wps output, Band I, synthesized. A/V input. Includes output filter and cabinet.

CTV/1000 As above for Band III.

CTU/1000 As above for Band IV/V.

Compact Transposers

Analog to digital television conversion kits for above.

TUBE TV AMPLIFIERS Sound/Image combined

KTV 1000 Output 1000 Wps. Input 25 Wps. Band III. Tube YL 1057 and notch output filter excluded.

KTU 1000 Output 1000 Wps. Input 25 Wps. Band IV/V. Tube YL 1057 and notch output filter excluded.

KTV 1500 Output 1500 Wps. Input 40 Wps. Band III. Tube TH 347 and notch output filter excluded.

KTU 1500 Output 1500 Wps. Input 40 Wps. Band IV/V. Tube TH 347 and notch output filter excluded.

KTI 5000 Output 5000 Wps. Input 120 Wps. Band I. Tube TH 371 and notch output filter excluded.

KTV 5000 Output 5000 Wps. Input 170 Wps. Band III. Tube RS 2022 CL and notch output filter excluded.

KTU 5000 Output 5000 Wps. Input 180 Wps. Band IV/V. Tube RS 1034 L and notch output filter excluded.

KTI 10000 Output 10 kWps A/V combined. Input 180 Wps. Band I. Tube TH 371 and notch output filter excluded.

KTV 10000 Output 10 kWps A/V combined. Input 340 Wps. Band III. Tube RS 2022 CL and notch output filter excluded.

KTU 10000 Output 10 kWps A/V combined. Input 340 Wps. Band IV/V. Tube RS 1036 CL and notch output filter excluded.

KTU 15000 Output 15 kWps A/V combined. Input 450 Wps. Band IV/V. Tube RS 1036 CL and notch output filter excluded. For image/sound ratio please contact our tech.

NOTE: For additional output notch filters see " band I-III-IV/V cavity notch filters" section.

TUBE TV TRANSMITTERS Sound/Image combined

MTV 1000/T 1000 Wps, III band, composed of: VAM 01/DV, IFCV/5, KSV 25, KTV 1000. Tube YL 1057 and notch filters excluded.

MTU 1000/T 1000 Wps, IV/V band, composed of: VAM 01/DV, IFCU/5, KSU 25, KTU 1000. Tube YL 1057 and notch filters excluded.

MTV 1500/T 1500 Wps, III band, composed of: VAM 01/DV, IFCV/5, KSV 50, KTV 1500. Tube TH 347 and notch filters excluded.

MTU 1500/T 1500 Wps, IV/V band, composed of: VAM 01/DV, IFCU/5, KSU 50, KTU 1500. Tube TH 347 and notch filters excluded.

MTI 5000/T 5500 Wps, I band, composed of: VAM 01/DV, IFCI/5, KSI 200, KTI 5000. Tube TH 371 and notch filters excluded.

MTV 5000/T 5500 Wps, III band, composed of: VAM 01/DV, IFCV/5, KSV 200, KTV 5000. Tube RS 2022 CL and notch filters excluded.

MTU 5000/T 5500 Wps, IV/V band, composed of: VAM 01/DV, IFCU/5, KBU 250, KTU 5000. Tube RS 1034 L and notch filters excluded.

MTI 10000/T 10 kWps, I band, composed of: VAM 01/DV, IFCI/5, KSI 400, KTI 10000. Tube TH 371 and notch filters excluded.

MTV 10000/T 10 kWps, III band, composed of: VAM 01/DV, IFCV/5, KSV 400, KTV 10000. Tube RS 2022 CL and notch filters excluded.

MTU 10000/T 10 kWps, IV/V band, composed of: VAM 01/DV, IFCU/5, KBU 500, KTU 10000. Tube RS 1036 CL and notch filters excluded.

TUBE TV TRANSMITTERS - Sound/Image splitted

MTI 20000/T 20000 Wps, I band, 45 - 90 MHz. Composed of: MTI 1000/S (image driver), KTI 20000 (image amplifier), MTI 5000/T (sound transmitter) and NDI 22 (sound/image combiner). Tubes and notch filters excluded (see below for pricing).

MTV 20000/T 20000 Wps, III band, 174 - 230 MHz. Composed of: MTV 1000/S (image driver), KTV 20000 (image amplifier), MTV 5000/T (sound transmitter), NDV 22 (sound/image combiner). Tubes RS 1034 L, TH 371 and notch filters excluded (see below for pricing).

MTU 20000/T 20000 Wps, IV/V band, 470 - 860 MHz. Composed of: MTU 1000/S (image driver), KTU 20000 (image amplifier), MTU 5000/T (sound transmitter), NDU 22 (sound/image combiner). Tubes RS 1034 L, RS 1036 CL and notch filters excluded (see below for pricing).

HIGH POWER IOT AMPLIFIERS - digital ready

KTU/IOT30 Output Power: 30 kWps. Input Power: 350 Wps. Frequency Band: 470-860 MHz. TH 760 tube and notch filters included.

KTU/IOT40 Output Power: 40 kWps. Input Power: 500 Wps. Frequency Band: 470-860 MHz. TH 760 tube and notch filters included.

KTU/IOT60 Output Power: 60 kWps. Input Power: 1000 Wps. Frequency Band: 470-860 MHz. TH 770 tube and notch filters included.

HIGH POWER IOT AMPLIFIERS - digital ready

NOTE: All the following IOT transmitters are digital upgradable with DK-KB and DK-KIO options. Please contact our commercial dpt for characteristics, prices and availability: phone ++39 049 8700588, e-mail tech@dbbroadcast.com

MTU/IOT30 30 kWps output power, UHF Band, composed of: VAM 01/DV, IFCU/5, KBU 500, KTU/IOT30. TH 760 tube and notch filters included.

MTU/IOT40 40 kWps output power, UHF Band, composed of: VAM 01/DV, IFCU/5, KBU 500, KTU/IOT40. TH 760 tube and notch filters included.

MTU/IOT60 60 kWps output power, UHF Band, composed of: VAM 01/DV, IFCU/5, KBU 1000, KTU/IOT60. TH 770 tube and notch filters included.

TUBES FOR CAVITY AMPLIFIERS

YL 1057 Siemens tube for KTU 1000 and KTV 1000 amplifiers.

RS 1034 L Siemens tube for KTU 5000 amplifiers.

RS 1036 CL Siemens tube for KTU 10000 and KTU 20000 and KTV 20000 amplifiers.

RS 2022 CL Siemens tube for KTV 5000 and KTV 10000 amplifiers.

TH 347 Thomson tube for KTV 1500 and KTU 1500 amplifiers.

TH 371 Thomson tube for KTI 5000 and KTI 10000 amplifiers.

TH 760 Thomson tube for 30 kW and 40 kW IOT amplifiers.

TH 770 Thomson tube for 60 kW IOT amplifiers.

NOTCH FILTERS FOR TUBE AMPLIFIERS (I-III-IV/V BAND)

FNI 3/10 Band I, 3 cavities, EIA 7/8" connectors. 1.5 KW max power.

FNV 3/10 Band III, 3 cavities, EIA 7/8" connectors. 1.5 KW max power.

FNU 3/10 Band IV/V, 3 cavities, EIA 7/8" connectors. 1.5 KW max power.

FNU 4/10 Band IV/V, 4 cavities, EIA 7/8" connectors. 1.5 KW max power.

FNU 7/10 Band IV/V, 7 cavities, EIA 7/8" connectors. 1.5 KW max power.

FNI 3/65 Band I, 3 cavities, EIA 1+5/8" connectors. 6.5 KW max power.

FNV 3/65 Band III, 3 cavities, EIA 1+5/8" connectors. 6.5 KW max power.

FNU 3/65 Band IV/V, 3 cavities, EIA 1+5/8" connectors. 6.5 KW max power.

FNU 4/65 Band IV/V, 4 cavities, EIA 1+5/8" connectors. 6.5 KW max power.

FNU 7/65 Band IV/V, 7 cavities, EIA 1+5/8" connectors. 6.5 KW max power.

FNI 3/120 Band I, 3 cavities, EIA 1+5/8" connectors. 12 KW max power.

FNV 3/120 Band III, 3 cavities, EIA 1+5/8" connectors. 12 KW max power.

FNU 3/120 Band IV/V, 3 cavities, EIA 1+5/8" connectors. 12 KW max power.

FNU 4/120 Band IV/V, 4 cavities, EIA 1+5/8" connectors. 12 KW max power.

FNU 7/120 Band IV/V, 7 cavities, EIA 1+5/8" connectors. 12 KW max power.

FNV 3/200 Band III, 3 cavities, EIA 3+1/8" connectors. 22 KW max power.

FNV 4/200 Band III, 4 cavities, EIA 3+1/8" connectors. 22 KW max power.

FNV 7/200 Band III, 7 cavities, EIA 3+1/8" connectors. 22 KW max power.

FNU 3/200 Band IV/V, 3 cavities, EIA 3+1/8" connectors. 22 KW max power.

FNU 4/200 Band IV/V, 4 cavities, EIA 3+1/8" connectors. 22 KW max power.

FNU 7/200 Band IV/V, 7 cavities, EIA 3+1/8" connectors. 22 KW max power.

NOTE: Combining 2 or 3 filters of the FN_3 series (3 cavities), it is possible to obtain filters with 6 and 9 cavities respectively.

SOUND/IMAGE COMBINERS

NDV 11 12 kW, VHF, S/I combiner. Sound, image input connectors: EIA 1+5/8", output connector: 3+1/8". 1 kW dummy load included.

NDV 22 22 kW, VHF, S/I combiner. Sound, image input connectors: EIA 3+1/8", output connector: 3+1/8". 1.5 kW dummy load included.

NDU 11 12 kW, UHF, S/I combiner. Sound, image input connectors: EIA 1+5/8", output connector: 3+1/8". 1 kW dummy load included.

NDU 22 22 kW, UHF, S/I combiner. Sound, image input connectors: EIA 3+1/8", output connector: 3+1/8". 1.5 kW dummy load included.

DIGITAL TELEVISION MODULATORS

DVB-T COFDM DIGITAL MODULATORS

DVME-16 Digital professional COFDM modulator, ITU DVB-T compliant, MFN or SFN operation, serial transport stream input available. Fully configurable modulator to meet all international standards. Includes a High Level Digital Phase and Gain precorrector with software control. IF and RF output.

DVME-04 Digital professional COFDM modulator, ITU DVB-T compliant, MFN or SFN operation, serial transport stream input available. Basic Version. IF output.

DVME-16 OPTIONS

/DVB-VDC 12/24 VDC power supply, suitable for battery and solar panel operation.

/DVB-70 70 MHz output IF for DVME-16.

DIGITAL COFDM ACCESSOIRES

DVB-SFNA SFN adapter, 2 ASI outputs.

DVB-MNT COFDM Monitor.

ATSC DIGITAL MODULATORS

DVMU-08 ATSC 8-VSB Digital Modulator. IF and RF output.

DIGITAL TELEVISION TRANSMITTERS

SOLID STATE, III BAND, 174 - 230 MHz.
Note: Following transmitters' prices don't include the digital modulators. To obtain complete configurations add the modulator for the standard you want (DVB-T, ATSC, others.)

DBTV/10 10 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/30 30 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/50 50 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/130 130 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/250 250 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/500 500 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/1000 1000 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTV/2000 2000 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

SOLID STATE, IV/V BAND, 470 - 860 MHz.
DBTU/10 10 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/30 30 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/50 50 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/130 130 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/250 250 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/500 500 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/1000 1000 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

DBTU/2000 2000 Wrms synthesized digital solid state transmitter. "DVB-T" output filter included.

TUBE, III BAND, 174 - 230 MHz.
DBTV/250-T 250 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTV/350-T 350 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTV/1000-T 1000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTV/2000-T 2000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

TUBE, IV/V BAND, 470 - 860 MHz.
DBTU/250-T 250 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/350-T 350 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/1000-T 1000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/2000-T 2000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/5k-T 5000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/7k-T 7000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

DBTU/10000-T 10000 Wrms synthesized digital tube transmitter. "DVB-T" output filter included.

REMOTE, TELEMETRY, CHANGEOVER SYSTEMS

TM/RC 232 Remote control and telemetry interface with direct PC (RS 232) connection to control & monitor the main parameters of the transmitter through telephonic line, GSM or radio link. 8 digital inputs, 8 analog inputs, 8 on-off switches. Fully compatible with all standard telephonic modems. PC software included.

GM/08 GSM modem for remote control and telemetry.

RM/12 Modem for remote control and telemetry via radio transceivers.

ACO1/TV03 Automatic changeover system for 1+1 operations. 0.3+0.3 kW. Includes RF switchers. Dummy load not included.

ACO1/TV12 As above for 1.2+1.2 kW.

ACO1/TV36 As above for 3.6+3.6 kW.

ACO1/TV120 As above for 12+12 kW.

ACO1/TV240 As above for 24+24 kW.

MICROWAVE TV LINKS (1.3-24.5 GHz)

NOTE: All the outdoor waterproof microwave transmitters ( HMT series ) and receivers (HMR series) are also available as indoor version at the same price.

IF MODULATORS AND DEMODULATORS
MMT Audio/Video IF modulator for HMT microwave transmitter. Input: 1 Audio + 1 Video. Synthesized output frequency 1000±1400 MHz (step 125 kHz). Options: up to 3 additional audio channels (total: 4 channels maximum).

IFMT 70 IF converter for HMT microwave transmitter. Input: IF 70 MHz. Output: 1000±1400 MHz synthesized (step 125 kHz).

MMT 70 Sound/image IF modulator for HMT microwave transmitter. Input 1 video + 1 audio & IF 70 MHz. Output frequency range 1000-1400 MHz, synthesized with 125 kHz steps. Options: up to 3 additional audio channels (total: 4 channels maximum).

MMT 70/IF Sound/image IF modulator for HMT microwave transmitter. Input 1 video + 1 audio. Outputs: IF 70 MHz & 15 VDC through the N connector (to feed the transmitter). Options: up to 3 additional audio channels (total: 4 channels maximum).

DMT Sound/image IF demodulator for HMR microwave receiver. Input: 1000±1400 MHz synthesized . Output: 1 Audio + 1 Video, IF 70 MHz. Options: up to 3 additional audio channels (total: 4 channels maximum).

DMT 70/IF Sound/image IF demodulator for HMR microwave receiver. Ouputs: 1 video + 1 audio. Input IF 70 MHz. Options: up to 3 additional audio channels (total: 4 channels maximum).

NOTE: The audio channels for modulators and demodulators MMT, MMT 70, MMT 70/IF, DMT, DMT 70, DMT 70/IF are fully compatible with all DB's 2 channels digital coders and decoders TD2/16-RD2/16.

1.3 - 2.7 GHz COMPLETE MICROWAVE LINKS TRANSMITTERS
HMT 2/2 1.3-2.7 GHz transmitter. Output 2 W. Input: 1 video + 1 audio. Synthesized. Options: up to 3 additional audio channels (total: 4 channels maximum).

HMT 2/5 As above with 5 W output power.

HMT 2/25 As above with 25 W output power.

HMT 2/2/70 IF converter/transmitter with input IF 70 MHz. Output: 2 W. Outdoor version.

HMT 2/5/70 As above with 5 W output power.

HMT 2/25/70 As above with 25 W output power.

KN 25/2G 25 W output power amplifier, input power: 2W. 1.3-2.7 GHz band.

1.3 - 2.7 GHz COMPLETE MICROWAVE LINKS RECEIVERS
HMR 2 1.3-2.7 GHz receiver. Output: 1 video/1 audio channel. Synthesized. Options: up to 3 additional audio channels (total: 4 channels maximum).

HMR 2/70 As above with wit output IF 70 MHz. Outdoor version including waterproof box.

1.3 - 2.7 GHz COMPLETE MICROWAVE LINKS
MVL 2/2 Complete microwave link composed of: 2 W transmitter (HMT2/2), receiver (HMR/2), Standard capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antenna and feeder cables not included.

MVL 2/5 As above with HMT 2/5, 5 W output power transmitter.

MVL 2/25 As above with HMT 2/25, 25 W output power transmitter.

MVL 2/2/70 Complete microwave link with IF 70 MHz, composed of: IF-modulator (MMT 70/IF), 2 W IF-converter/transmitter (HMT 2/2/70), receiver (HMR/2/70), IF-demodulator (DMT 70/IF). Standard capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antennas and feeder cables not included.

MVL 2/5/70 As above with HMT 2/5/70, 5 W output power transmitter.

MVL 2/25/70 As above with HMT 2/25/70, 25 W output power transmitter.

1.3 - 2.7 GHz MICROWAVE LINK TRANSPOSERS
RPT 2/2 RF input in 1.3 - 2.7 GHz band. Output 2 W.

RPT 2/5 As above with 5 W output power.

RPT 2/25 As above with 25 W output power.

4.2 - 4.8 GHz MICROWAVE LINK TRANSMITTERS
HMT 4/1 IF converter/transmitter with input IF 1.1-1.4 GHz. Output 1 W (4.2 - 4.8 GHz). Power supply: 15 VDC through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with MMT Audio/Video IF-modulator. Options: high frequency stability. Indoor version (HMT 4/1-I) available.

HMT 4/4 As above with 4 W output power.

HMT 4/8 As above with 8 W output power.

HMT 4/1/70 As HMT 4/1 with IF input 70 MHz. Compatible with MMT 70/IF modulator.

HMT 4/4/70 As above with 4 W output power.

HMT 4/8/70 As above with 8 W output power.

4.2 - 4.8 GHz MICROWAVE LINK RECEIVERS
HMR 4 4.2-4.8 GHz receiver. Output IF 1100-1400 MHz. 15 VDC power supply through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with DMT Audio/Video IF-demodulator. Options: high frequency stability. Indoor version (HMR8-I) available at same price.

HMR 4/70 As above with output IF 70 MHz. Compatible with DMT 70/IF demodulator.

4.2 - 4.8 GHz COMPLETE MICROWAVE LINKS
MVL 4/1 Complete microwave link with IF 1.1 - 1.4 GHz, composed of: 1 W transmitter (HMT 4/1), receiver (HMR 4), IF mod. (MMT), IF demod. (DMT). Standard capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum), 70 MHz IF input for MMT modulators. Antenna and feeder cables not included.

MVL 4/4 As above with HMT 4/4, 4 W output power transmitter.

MVL 4/8 As above with HMT 4/8, 8 W output power transmitter.

MVL 4/1/70 Complete microwave link with IF 70 MHz, composed of: IF-modulator (MMT 70/IF), 2 W IF-converter/transmitter (HMT 4/4/70), receiver (HMR/4/70), IF-demodulator (DMT 70/IF). Standard capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antennas and feeder cables not included.

MVL 4/4/70 As above with HMT 4/4, 4 W output power transmitter.

MVL 4/8/70 As above with HMT 4/8, 8 W output power transmitter.

4.2 - 4.8 GHz TRANSPOSERS
MVT 4/1 4.2 - 4.8 GHz complete transposer composed of: 1 W transmitter (HMT4/1), receiver (HMR 4), AL/HM power supply module, H/W accessories. Antennas and feeder cables not included.

MVT 4/4 As above with HMT 4/4, 4 W output power transmitter.

MVT 4/8 As above with HMT 4/8, 8 W output power transmitter.

5.9 - 9.9 GHz MICROWAVE LINK TRANSMITTERS
HMT 8/02 IF converter/transmitter with input IF 1.1-1.4 GHz. Output 0.15 W (5.9 - 9.9 GHz). Power supply: 15 VDC through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with MMT Audio/Video IF-modulator. Options: high frequency stability. Indoor version (HMT 8/02-I) available.

HMT 8/1 As above with 1 W output power.

HMT 8/4 As above with 4 W output power (5.9 - 8.5 GHz).

HMT 8/6 As above with 6 W output power (5.9 - 8.5 GHz).

HMT 8/8 As above with 8 W output power (5.9 - 8.5 GHz).

HMT 8/02/70 As HMT 8/02 with IF input 70 MHz. Compatible with MMT 70/IF modulator.

HMT 8/1/70 As above with 1 W output power.

HMT 8/4/70 As above with 4 W output power (5.9 - 8.5 GHz).

HMT 8/6/70 As above with 6 W output power (5.9 - 8.5 GHz).

HMT 8/8/70 As above with 8 W output power (5.9 - 8.5 GHz).

5.9 - 9.9 GHz MICROWAVE LINK RECEIVERS
HMR 8 5.9-9.9 GHz receiver. Output IF 1100-1400 MHz. 15 VDC power supply through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with DMT Audio/Video IF-demodulator. Options: high frequency stability. Indoor version (HMR8-I) available at same price.

HMR 8/70 As above with output IF 70 MHz. Compatible with DMT 70/IF demodulator.

5.9 - 9.9 GHz COMPLETE MICROWAVE LINKS
MVL 8/02 5.9 - 9.9 GHz complete microwave link composed of: 0.2 W transmitter (HMT8/02), receiver (HMR 8), IF mod. (MMT), IF demod. (DMT). Capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antenna and feeder cables not included.

MVL 8/1 As above with HMT 8/1, 1 W output power transmitter.

MVL 8/4 As above with HMT 8/4, 4 W output power transmitter (5.9 - 8.5 GHz).

MVL 8/6 As above with HMT 8/6, 6 W output power transmitter (5.9 - 8.5 GHz).

MVL 8/8 As above with HMT 8/8, 8 W output power transmitter (5.9 - 8.5 GHz).

5.9 - 9.9 GHz TRANSPOSERS
MVT 8/02 5.9 - 9.9 GHz complete transposer composed of: 0.2 W transmitter (HMT8/02), receiver (HMR 8), AL/HM power supply module, H/W accessories. Antennas and feeder cables not included.

MVT 8/1 As above with HMT 8/1, 1 W output power transmitter.

MVT 8/4 As above with HMT 8/4, 4 W output power transmitter (5.9 - 8.5 GHz).

MVT 8/6 As above with HMT 8/6, 6 W output power transmitter (5.9 - 8.5 GHz).

MVT 8/8 As above with HMT 8/8, 8 W output power transmitter (5.9 - 8.5 GHz).

10.1 - 12.7 GHz MICROWAVE LINKS TRANSMITTERS
HMT 10/02 IF converter/transmitter with IF input: 1.1-1.4 GHz. Output 0.15 W (10.1-12.7 GHz) band. Power supply: 15 VDC through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with MMT Audio/Video IF-modulator. Options: high frequency stability. Indoor version (HMT 10/02-I) available.

HMT 10/1 As above with 1 W output power.

HMT 10/4 As above with 4 W output power.

HMT 10/6 As above with 6 W output power.

HMT 10/8 As above with 8 W output power.

HMT 10/02/70 As HMT 10/02 with IF input 70 MHz. Compatible with MMT 70/IF modulator.

HMT 10/1/70 As above with 1 W output power.

HMT 10/4/70 As above with 4 W output power.

HMT 10/6/70 As above with 6 W output power.

HMT 10/8/70 As above with 8 W output power.

10.1 - 12.7 GHz MICROWAVE LINKS RECEIVERS
HMR 10 10.1 - 12.7 GHz receiver. Output IF 1000-1400 MHz. 15 VDC power supply through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with DMT Audio/Video IF-demodulator. Options: high frequency stability. Indoor version (HMR 10-I) available.

HMR 10/70 As above with output IF 70 MHz. Compatible with DMT 70/IF.

10.1 - 12.7 GHz COMPLETE MICROWAVE LINKS
MVL 10/02 10.1 - 12.7 GHz complete microwave link composed of: 0.2 W transmitter (HMT 10/02), receiver (HMR 10), IF mod. (MMT), IF demod. (DMT). Capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Do not includes antenna and feeder cables.

MVL 10/1 As above with HMT 10/1, 1 W output power transmitter.

MVL 10/4 As above with HMT 10/4, 4 W output power transmitter.

MVL 10/6 As above with HMT 10/6, 6 W output power transmitter.

MVL 10/8 As above with HMT 10/8, 8 W output power transmitter.

10.1 - 12.7 GHz TRANSPOSERS
MVT 10/02 10.1 - 12.7 GHz complete transposer composed of: 0.2 W transmitter (HMT10/02), receiver (HMR 10), AL/HM power supply module, H/W accessories. Antennas and feeder cables not included.

MVT 10/1 As above with HMT 10/1, 1 W output power transmitter.

MVT 10/4 As above with HMT 10/4, 4 W output power transmitter.

MVT 10/6 As above with HMT 10/6, 6 W output power transmitter.

MVT 10/8 As above with HMT 10/8, 8 W output power transmitter.

12.8 - 14.9 GHz MICROWAVE LINK TRANSMITTERS
HMT 14/02 IF converter/transmitter with input IF 1.1-1.4 GHz. Output 0.15 W (12.8 - 14.9 GHz). Power supply: 15 VDC through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with MMT Audio/Video IF-modulator. Options: high frequency stability. Indoor version (HMT 14/02-I) available.

HMT 14/1 As above with 1 W output power.

HMT 14/02/70 As HMT 14/02 with IF input 70 MHz. Compatible with MMT 70/IF modulator.

HMT 14/1/70 As above with 1 W output power.

12.8 - 14.9 GHz MICROWAVE LINKS RECEIVERS
HMR 14 12.8 - 14.9 GHz receiver. Output IF 1000-1400 MHz. 15 VDC power supply through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with DMT Audio/Video IF-demodulator. Options: high frequency stability. Indoor version (HMR 14-I) available.

HMR 14/70 As above with output IF 70 MHz. Compatible with DMT 70/IF.

12.8 - 14.9 GHz COMPLETE MICROWAVE LINKS
MVL 14/02 12.8 - 14.9 GHz complete microwave link composed of: 0.2 W transmitter (HMT 14/02), receiver (HMR 14), IF mod. (MMT), IF demod. (DMT). Capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antenna and feeder cables not include .

MVL 14/1 As above with HMT 14/1, 1 W output power transmitter.

MVL 14/4 As above with HMT 14/4, 4 W output power transmitter.

MVL 14/6 As above with HMT 14/6, 6 W output power transmitter.

MVL 14/8 As above with HMT 14/8, 8 W output power transmitter.

12.8 - 14.9 GHz TRANSPOSERS
MVT 14/02 12.8 - 14.9 GHz complete transposer composed of: 0.2 W transmitter (HMT14/02), receiver (HMR 14), AL/HM power supply module, H/W accessories. Antennas and feeder cables not included.

MVT 14/1 As above with HMT 14/1, 1 W output power transmitter.

MVT 14/4 As above with HMT 14/4, 4 W output power transmitter.

MVT 14/6 As above with HMT 14/6, 6 W output power transmitter.

MVT 14/8 As above with HMT 14/8, 8 W output power transmitter.

22.5 - 24.5 GHz MICROWAVE LINK TRANSMITTERS
HMT 24/02 IF converter/transmitter with input IF 1.1-1.4 GHz. Output 100 mW (22.5 - 24.5 GHz). Power supply: 15 VDC through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with MMT Audio/Video IF-modulator. Options: high frequency stability. Indoor version (HMT 24/02-I) available.

HMT 24/03 As above with 0.3 W output power.

HMT 24/1 As above with 1 W output power.

HMT 24/01/70 As HMT 24/01 with IF input 70 MHz. Compatible with MMT 70/IF modulator.

HMT 24/03/70 As above with 0.3 W output power.

HMT 24/1/70 As above with 1 W output power.

22.5 - 24.5 GHz MICROWAVE LINKS RECEIVERS
HMR 24 22.5 - 24.5 GHz receiver. Output IF 1000-1400 MHz. 15 VDC power supply through RF connector. Outdoor version including waterproof box and clamps for easy rear antenna installation. Compatible with DMT Audio/Video IF-demodulator. Options: high frequency stability. Indoor version (HMR 24-I) available.

HMR 24/70 As above with output IF 70 MHz. Compatible with DMT 70/IF demodulator.

22.5 - 24.5 GHz COMPLETE MICROWAVE LINKS
MVL 24/02 22.5 - 24.5 GHz complete microwave link composed of: 0.1 W transmitter (HMT 24/01), receiver (HMR 24), IF mod. (MMT), IF demod. (DMT). Capacity: 1 video/1 audio channels. Options: up to 3 additional audio channels (4 channels maximum). Antenna and feeder cables not include .

MVL 24/03 As above with HMT 24/03, 0.3 W output power transmitter.

MVL 24/1 As above with HMT 24/1, 1 W output power transmitter.

22.5 - 24.5 GHz TRANSPOSERS
MVT 24/01/06 22.5 - 24.5 GHz complete transposer composed of: 0.1 W transmitter (HMT24/01), receiver (HMR 24), AL/HM power supply module, H/W accessories. Antennas and feeder cables not included.

MVT 24/03/06 As above with HMT 24/03, 0.3 W output power transmitter.

MVT 24/1/06 As above with HMT 24/1, 1 W output power transmitter.

OPTIONS FOR MICROWAVE LINKS
/I Indoor version for HMT tranmitters and HMR receivers.

AMT 2/T Each additional audio channel for MMT microwave transmitter.

AMT 2/R Each additional audio channel for DMT microwave receiver.

HFS 10 Frequency stability: better than 10 ppm in HMT and HMR microwave transmitters/receivers.

MD 70 IF 70 MHz for MMT IF modulators.

HFS 05 Frequency stability: better than 5 ppm in HMT and HMR microwave transmitters/receivers.

AL/HM Power supply module for HMT transmitters, HMR receivers and microwave transposer.

PORTABLE MICROWAVE TV LINKS - anal

MLP/2G 1.3-2.7 GHz complete portable microwave TV link composed of: 2 W transmitter, receiver, 2 directional antennas ( LOG/2GR ), 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP5/2G 1.3-2.7 GHz complete portable microwave TV link composed of: 5 W transmitter, receiver, 2 directional antennas ( LOG/2GR ), 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP02/8G 5.9 - 9.9 GHz complete portable microwave TV link composed of: 150 mW transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP1/8G 5.9 - 9.9 GHz complete portable microwave TV link composed of: 1 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP4/8G 5.9 - 9.9 GHz complete portable microwave TV link composed of: 4 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP8/8G 5.9 - 9.9 GHz complete portable microwave TV link composed of: 8 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP02/10G 10.1 - 12.7 GHz complete portable microwave TV link composed by: 150 mW transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP1/10G 10.1 - 12.7 GHz complete portable microwave TV link composed by: 1 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP4/10G 10.1 - 12.7 GHz complete portable microwave TV link composed of: 4 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP8/10G 10.1 - 12.7 GHz complete portable microwave TV link composed of: 8 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP02/14G 12.8 - 14.9 GHz complete portable microwave TV link composed by: 150 mW transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP1/14G 12.8 - 14.9 GHz complete portable microwave TV link composed by: 1 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP4/14G 12.8 - 14.9 GHz complete portable microwave TV link composed by: 4 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP8/14G 12.8 - 14.9 GHz complete portable microwave TV link composed by: 8 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP02/24G 22.5 - 24.5 GHz complete portable microwave TV link composed by: 150 mW transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

MLP1/24G 22.5 - 24.5 GHz complete portable microwave TV link composed by: 1 W transmitter, receiver, 2x0.6 mt parabolas, 2 outdoor waterproof boxes. Capacity: 1 video/2 audio channels. Operating frequency: synthesized.

OPTIONS FOR PORTABLE MICROWAVE LINKS: Different models of tripods with panning head.
TV DIGITAL MICROWAVE LINKS 1.3 - 24.5 GHz

MPEG-2 ENCODERS AND DECODERS
MDE 1 4.2.0 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Capacity:1 video + 2 audio.

MDE 2 4.2.0 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:2 video + 4 audio.

MDE 3 4.2.0 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:3 video + 6 audio.

MDE 4 4.2.0 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:4 video + 8 audio.

MPE 1 4.2.2 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Capacity:1 video + 2 audio.

MPE 1-2A 4.2.2 professional real-time MPEG-2 Audio/Video encoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:1 video + 4 audio.

MDD 1 4.2.0 MPEG-2 Audio/Video decoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:1 video + 2 audio.

MDD 1-2A 4.2.0 MPEG-2 Audio/Video decoder, analog or digital input, ASI Transport stream output. Multiplexer included Capacity:1 video + 4 audio.

DIGITAL QPSK IF MODEMS
DQM70 QPSK 70 MHz IF modulator for digital microwave links, DVB-S (ETS 300 421) compliant.

DQD70 QPSK 70 MHz IF demodulator for digital microwave links, DVB-S (ETS 300 421) compliant, transport stream output.

DIGITAL QPSK MODULATORS/ENCODERS
DQM1/70 QPSK 70 MHz IF modulator for digital microwave links, DVB-S (ETS 300 421) compliant, including one 4.2.0 MPEG-2 encoder with 1 video+2 audio channels capacity.

DQM2/70 QPSK 70 MHz IF modulator for digital microwave links, DVB-S (ETS 300 421) compliant, including two 4.2.0 MPEG-2 encoders with 2 video+4 audio channels capacity.

DQM3/70 QPSK 70 MHz IF modulator for digital microwave links, DVB-S (ETS 300 421) compliant, including three 4.2.0 MPEG-2 encoder with 3 video+6 audio channels capacity.

DQM4/70 QPSK 70 MHz IF modulator for digital microwave links, DVB-S (ETS 300 421) compliant, including four 4.2.0 MPEG-2 encoders with 4 video+8 audio channels capacity.

DIGITAL QPSK RECEIVERS/DECODERS
DQD1/L QPSK L-BAND (950 to 2150 MHz) IF demodulator for digital microwave links, DVB-S (ETS 300 421) compliant, including one 4.2.0 MPEG-2 decoder with 1 video+2 audio channels capacity.

DQD2/L QPSK L-BAND (950 to 2150 MHz) IF demodulator for digital microwave links, DVB-S (ETS 300 421) compliant, including two 4.2.0 MPEG-2 decoders with 2 video+4 audio channels capacity.

DQD3/L QPSK L-BAND (950 to 2150 MHz) IF demodulator for digital microwave links, DVB-S (ETS 300 421) compliant, including three 4.2.0 MPEG-2 decoders with 3 video+6 audio channels capacity.

1.3 - 2.7 GHz band
MDT 2/28 Digital transmitter. Output power: +28 dBm for BPSK, QPSK and 8PSK modulation and +25 dBm for QAM modulation.

MDT 2/32 Digital transmitter.Output power : +32 dBm for BPSK, QPSK, 8PSK and +29 dBm for QAM modulation.

MDT 2/38 Digital transmitter. Power: +38 dBm for BPSK, QPSK and 8PSK , +35 dBm for QAM modulation.

MDR 2 Digital receiver. Compatible with BPSK, QPSK, 8PSK and QAM modulations.

DRPT 2/28 Digital repeater. Output power: +28 dBm for BPSK, QPSK and 8PSK modulation, +25 dBm for QAM modulation.

DRPT 2/32 Digital repeater. Transmitting available power: +32 dBm for BPSK, QPSK and 8PSK , +29 dBm for QAM modulation.

DRPT 2/38 Digital repeater. Transmitting available power: +38 dBm for BPSK, QPSK and 8PSK , +35 dBm for QAM modulation.

5.4 - 9.9 GHz band
MDT 8/16 Digital transmitter. Output power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

MDT 8/26 Digital transmitter. Output power: +26 dBm for BPSK, QPSK and 8PSK , +23 dBm for QAM modulation.

MDT 8/32 Digital transmitter. Output power: +32 dBm for BPSK, QPSK and 8PSK , +29 dBm for QAM modulation.

MDT 8/35 Digital transmitter. Output power: +35 dBm for BPSK, QPSK and 8PSK , +32 dBm for QAM modulation.

MDR 8 Digital receiver. Compatible with BPSK, QPSK, 8PSK and QAM modulations.

DRPT 8/16 Digital repeater. Transmitting available power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

DRPT 8/26 Digital repeater. Transmitting available power: +26 dBm for BPSK, QPSK and 8PSK , + 22 dBm for QAM modulation.

DRPT 8/32 Digital repeater. Transmitting available power: +32 dBm for BPSK, QPSK and 8PSK , + 29 dBm for QAM modulation.

DRPT 8/35 Digital repeater. Transmitting available power: +35 dBm for BPSK, QPSK and 8PSK , + 32 dBm for QAM modulation.

10.0 - 12.7 GHz band
MDT 10/16 Digital transmitter. Output power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

MDT 10/26 Digital transmitter. Output power: +26 dBm for BPSK, QPSK and 8PSK , +23 dBm for QAM modulation.

MDT 10/32 Digital transmitter. Output power: +32 dBm for BPSK, QPSK and 8PSK , +29 dBm for QAM modulation.

MDT 10/35 Digital transmitter. Output power: +35 dBm for BPSK, QPSK and 8PSK , +32 dBm for QAM modulation.

MDR 10 Digital receiver. Compatible with BPSK, QPSK, 8PSK and QAM modulations.

DRPT 10/16 Digital repeater. Transmitting available power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

DRPT 10/26 Digital repeater. Transmitting available power: +26 dBm for BPSK, QPSK and 8PSK , + 22 dBm for QAM modulation.

DRPT 10/32 Digital repeater. Transmitting available power: +32 dBm for BPSK, QPSK and 8PSK , + 29 dBm for QAM modulation.

DRPT 10/35 Digital repeater. Transmitting available power: +35 dBm for BPSK, QPSK and 8PSK , + 32 dBm for QAM modulation.

12.8 - 15.0 GHz band
MDT 14/16 Digital transmitter. Output power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

MDT 14/26 Digital transmitter. Output power: +26 dBm for BPSK, QPSK and 8PSK , +23 dBm for QAM modulation.

MDT 14/32 Digital transmitter. Output power: +32 dBm for BPSK, QPSK and 8PSK , +29 dBm for QAM modulation.

MDT 14/35 Digital transmitter. Output power: +35 dBm for BPSK, QPSK and 8PSK , +32 dBm for QAM modulation.

MDR 14 Digital receiver. Compatible with BPSK, QPSK, 8PSK and QAM modulations.

DRPT 14/16 Digital repeater. Transmitting available power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

DRPT 14/26 Digital repeater. Transmitting available power: +26 dBm for BPSK, QPSK and 8PSK , + 22 dBm for QAM modulation.

DRPT 14/32 Digital repeater. Transmitting available power: +32 dBm for BPSK, QPSK and 8PSK , + 29 dBm for QAM modulation.

DRPT 14/35 Digital repeater. Transmitting available power: +35 dBm for BPSK, QPSK and 8PSK , + 32 dBm for QAM modulation.

22.5 - 24.5 GHz band
MDT 23/16 Digital transmitter. Output power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

MDT 23/26 Digital transmitter. Output power: +26 dBm for BPSK, QPSK and 8PSK , +23 dBm for QAM modulation.

MDR 23 Digital receiver. Compatible with BPSK, QPSK, 8PSK and QAM modulations.

DRPT 23/16 Digital repeater. Transmitting available power: +16 dBm for BPSK, QPSK and 8PSK , +13 dBm for QAM modulation.

DRPT 23/26 Digital repeater. Transmitting available power: +26 dBm for BPSK, QPSK and 8PSK , + 22 dBm for QAM modulation.

MICROWAVE BRANCHING FOR BOTH-WAY LINKS
BRC/2G 1.3 - 2.7 GHz branching unit to combine transmission and reception in the same antenna.

BRC/8G 5.4 - 9.9 GHz branching unit to combine transmission and reception in the same antenna.

BRC/10G 10 - 12.7 GHz branching unit to combine transmission and reception in the same antenna.

BRC/14G 12.8 - 15.0 GHz branching unit to combine transmission and reception in the same antenna.

BRC/23G 22.5 - 24.5 GHz branching unit to combine transmission and reception in the same antenna.

ANTENNAS FOR MICROWAVE LINKS

Logarithmic Directive Antennas
ATM9/N 230-470 MHz, gain 6.5 dBd, 9 elements, aluminium, N connector. Max. power 400 W.

AT515/N 470-900 MHz, gain 9.2 dBd, 15 elements, aluminium, N connector. Max. power 400 W.

AT513/N 600-1000 MHz, gain 9.6 dBd, 13 elements, aluminium, N connector. Max. power 400 W.

LOG/1.6G 1-1.6 GHz, broadband, gain 9 dBd, 10 elements, aluminium, N connector, Max. power 400 W.

LOG/1.8GR 1.65-1.8 GHz, gain 12.4 dB, broadband, waterproof radome included.

LOG/2.7GR 1.8-2.6 GHz, gain 12.4 dB, broadband, waterproof radome included.

Standard Parabolic Antennas (PAR)
All standard parabolic antennas (PAR) allow the direct connection of outdoor microwave transmitters (HMT series) without avoiding use of waveguide.

PAR0.6/G 800-1020 MHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 13 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/G As above with 100 cm diameter and gain 17 dB.

PAR1.2/G As above with 120 cm diameter and gain 18 dB.

PAR1.5/G As above with 150 cm diameter and gain 20 dB.

PAR1.8/G As above with 180 cm diameter and gain 22 dB.

PAR0.6/2G 1.1-2.7 GHz parabolic antenna.1 mt diameter aluminium dish. Gain at center frequency: 18.5 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/2G As above with 100 cm diameter and gain 22 dB.

PAR1.2/2G As above with 120 cm diameter and gain 24 dB.

PAR1.5/2G As above with 150 cm diameter and gain 27 dB.

PAR1.8/2G As above with 180 cm diameter and gain 28 dB.

PAR06/8G 5.6-9.9 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 31 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/8G As above with 100 cm diameter and gain 36 dB.

PAR1.2/8G As above with 120 cm diameter and gain 38 dB.

PAR1.5/8G As above with 150 cm diameter and gain 40 dB.

PAR1.8/8G As above with 180 cm diameter and gain 41 dB.

PAR06/10G 10.1-12.7 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/10G As above with 100 cm diameter and gain 37 dB.

PAR1.2/10G As above with 120 cm diameter and gain 39 dB.

PAR1.5/10G As above with 150 cm diameter and gain 41 dB.

PAR1.8/10G As above with 180 cm diameter and gain 42 dB.

PAR06/14G 12.8-14.9 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/14G As above with 100 cm diameter and gain 37 dB.

PAR1.2/14G As above with 120 cm diameter and gain 39 dB.

PAR1.5/14G As above with 150 cm diameter and gain 41 dB.

PAR1.8/14G As above with 180 cm diameter and gain 42 dB.

PAR06/17G 14.9-17.8 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 37.5 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/17G As above with 100 cm diameter and gain 42 dB.

PAR1.2/17G As above with 120 cm diameter and gain 43.4 dB.

PAR1.5/17G As above with 150 cm diameter and gain 45.3 dB.

PAR1.8/17G As above with 180 cm diameter and gain 47 dB.

PAR06/23G 21.8-23.7 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 38.8 dB. Input connector: N. Illuminator, support with H/V micrometric adjustement, mounting clamps and stainless steel accessories included.

PAR1/23G As above with 100 cm diameter and gain 43.2 dB.

PAR1.2/23G As above with 120 cm diameter and gain 44.5 dB.

PAR1.5/23G As above with 150 cm diameter and gain 46.3 dB.

PAR1.8/23G As above with 180 cm diameter and gain 48.1 dB.

OPTIONS FOR MICROWAVE PARABOLIC ANTENNAS.
RAD 06 Fiberglass radome for PAR06.

RAD 1.0 Fiberglass radome for PAR1.

RAD 1.2 Fiberglass radome for PAR1.2.

RAD 1.5 Fiberglass radome for PAR1.5.

RAD 1.8 Fiberglass radome for PAR1.8.

Grid Parabolic Antennas (GPA)
To connect all Grid Parabolic Antennas (GPA) to outdoor microwave transmitters (HMT series) it is necessary to use a flexible waveguide section (see below).

GPA06 0.6 mt diameter grid aluminium reflector. N connector. Includes feeder, mounting clamps and accessoires. Reduced weight and wind load even with ICE.

GPA10 As above with 100 cm diameter.

GPA1.2 As above with 120 cm diameter.

GPA20 As above with 200 cm diameter.

GPA30 As above with 300 cm diameter.

GPA40 As above with 400 cm diameter.

GPA60 As above with 600 cm diameter.

All above models are available in following frequency bands to specified upon order: 0.79-0.96, 1.35-1.85, 1.9-2.3, 2.3-2.45, 2.4-2.7 GHz

Gridfit Parabolic Antennas (GFPA)
To connect all Gridfit Parabolic Antennas (GFPA) to outdoor microwave transmitters (HMT series) it is necessary to use a flexible waveguide section (see below).

GFPA1.2 1.2 mt diameter GRIDFIT aluminium reflector. N connector. Includes feeder, mounting clamps and accessoires. Completely detachable to reduce volume and shipping costs.

GFPA20 As above with 200 cm diameter.

GFPA30 As above with 300 cm diameter.

GFPA40 As above with 400 cm diameter.

All above models are available in following frequency bands to specified upon order: 0.79-0.96, 1.35-1.85, 1.9-2.3, 2.3-2.45, 2.4-2.7 GHz

High Performance Parabolic Antennas (HPA)
To connect all High Performance Parabolic Antennas (HPA) to outdoor microwave transmitters (HMT series) it is necessary to use a flexible waveguide section (see below).

HPA06/8G 7.1-8.6 GHz. 0.6 mt diameter High Performances Antenna. Low profile to reduce the wind load. Includes feeder, mounting clamps, accessoires and plane radome.

HPA1.2/8G As above with 120 cm diameter.

HPA06/13G As above with 60 cm diameter and 12.5-13.4 GHz frequency band.

HPA1.2/13G As above with 120 cm diameter.

HPA06/15G As above with 60 cm diameter and 14.3-15.4 GHz frequency band.

HPA1.2/15G As above with 120 cm diameter.

HPA06/19G As above with 60 cm diameter and 17.6-19.8 GHz frequency band.

HPA1.2/19G As above with 120 cm diameter.

HPA03/23G As above with 30 cm diameter and 21.6-23.7 GHz frequency band.

HPA06/23G As above with 60 cm diameter.

HPA1.2/23G As above with 120 cm diameter.

HPA03/26G As above with 30 cm diameter and 24.4-26.7 GHz frequency band.

HPA06/26G As above with 60 cm diameter.

HPA1.2/26G As above with 120 cm diameter.

ANTENNA SYSTEMS DESIGN

Free computerized antenna pattern, null filling, beam tilt and coverage area and pattern optimization are available on request. For further information, please contact DB's Technical Dpt. at the phone ++ 39 049 8700588 or through and tech@dbbroadcast.com

TRANSMITTING ANTENNAS - 45-1200 MHz

NOTE: For antenna systems computerized design please contact our Tech. Dpt.: phone ++39 049 8700588 or E-mail: tech@dbbroadcast.com.

BAND I, 45 - 90 MHz.
AT16/N 6 elements directive logaritmic antenna. 45 - 90 MHz, broadband. Vertical or horizontal polarization. Gain: 4 dBd. Maximum power: 400 Wps. N connector. Aluminium. Mounting clamps included.

APOI/716 Horizontal polarization panel antenna. Bandwidth: 12 MHz. Gain: 5.5 dBd. Maximum input power: 1.4 kWps, DIN 7/16" connector. Hot-Dip galvanized steel. Mounting clamps included. The operative channel must be specified at the order.

APOI/78 As above with EIA 7/8" input connector and maximum input power 3.5 kWps .

APVI/716 Vertical polarization panel antenna. Bandwidth: 12 MHz. Gain: 5.5 dB. Maximum input power: 1.4 kWps, DIN 7/16" connector. Hot-Dip galvanized steel. Mounting clamps included. The operative channel must be specified at the order.

APVI/78 As above with EIA 7/8" input connector and maximum input power 3.5 kWps .

BAND III, 174 - 230 MHz.
AT34/N 4 elements directive logaritmic antenna. 174 - 230 MHz, broadband. Vertical or horizontal polarization. Gain: 5.4 dB. Maximum power: 400 Wps. N connector. Aluminium. Mounting clamps included.

AT33/N 3 elements directional antenna. 174 - 230 MHz, broadband. Horizontal or vertical polarization. Gain: 6.5 dBd. Maximum input power 600 W, N connector. Mounting clamps and stainless steel accesories included.

AT33/716 As above with DIN 7/16" input connector and maximum input power 1.4 kW .

AT33/78 As above with EIA 7/8" input connector and maximum input power 2.6 kW .

ATX33/N Like AT33/N enterely steinless steel.

ATX33/716 Like AT33/716 enterely steinless steel.

ATX33/78 Like AT33/78 enterely steinless steel.

APO3/78 Panel antenna. 174 - 230 MHz, broadband. Horizontal polarization. 6.8 dB gain. Max. input power: 2.5 kW, EIA 7/8" connector. Mounting clamps and stainless steel accesories included.

APV3/78 As above with vertical polarization.

BAND IV/V, 470 - 1200 MHz
AT45/N 5 elements directive logaritmic antenna. Frequency band: 450 - 600MHz. Vertical or horizontal polarization. Gain: 6.5 dBd. Maximum power: 400 Wps. N connector. Aluminium. Mounting clamps included.

AT55/N As above, with frequecy band: 600 - 1200 MHz.

APO 8/N Panel antenna. 470 - 890 MHz, broadband. Horizontal polarization. 12 dBd gain. Max. input power: 500 W, N connector. Mounting clamps and stainless steel accesories included.

APO 8/716 As above with DIN 7/16" input connector and input power 1.2 kW .

APO 8/78 As above with EIA 7/8" input connector and input power 2 kW .

APV 8/N Panel antenna. 470 - 860 MHz, broadband. Vertical polarization. 12 dB gain. Max. input power: 500 W, N connector. Mounting clamps and stainless steel accesories included.

APV 8/716 As above with DIN 7/16" input connector and input power 1.2 kW .

APV 8/78 As above with EIA 7/8" input connector and input power 2 kW .

ANTENNA SPLITTERS

ACT2/N 2 way splitter. III/IV/V band . N connector. 300 W max power.

ACT3/N 3 way splitter. III/IV/V band . N connector. 300 W max power.

ACT4/N 4 way splitter. III/IV/V band . N connector. 300 W max power.

ACT2/716/N 2 way splitter. III/IV/V band . Connectors: DIN 7/16" input, N outputs.

ACT3/716/N 3 way splitter. III/IV/V band . Connectors: DIN 7/16" input, N outputs.

ACT4/716/N 4 way splitter. III/IV/V band . Connectors: DIN 7/16" input, N outputs

ACT2/716 2 way splitter. III/IV/V band . DIN 7/16" connectors.

ACT3/716 3 way splitter. III/IV/V band . DIN 7/16" connectors.

ACT4/716 4 way splitter. III/IV/V band . DIN 7/16" connectors.

ACT2/78/N 2 way splitter. III/IV/V band . Connectors: EIA 7/8" input, N outputs.

ACT3/78/N 3 way splitter. III/IV/V band . Connectors: EIA 7/8" input, N outputs.

ACT4/78/N 4 way splitter. III/IV/V band . Connectors: EIA 7/8" input, N outputs.

ACT2/78/716 2 way splitter. III/IV/V band . Connectors: EIA 7/8" input, DIN 7/16 outputs.

ACT3/78/716 3 way splitter. III/IV/V band . Connectors: EIA 7/8" input, DIN 7/16 outputs.

ACT4/78/716 4 way splitter. III/IV/V band . Connectors: EIA 7/8" input, DIN 7/16 outputs.

ACT2/78 2 way splitter. III/IV/V band . EIA 7/8" connectors.

ACT3/78 3 way splitter. III/IV/V band . EIA 7/8" connectors.

ACT4/78 4 way splitter. III/IV/V band . EIA 7/8" connectors.

ACT2/158/78 2 way splitter. III/IV/V band . Connectors: EIA 1 5/8" input, EIA 7/8" outputs.

ACT3/158/78 3 way splitter. III/IV/V band . Connectors: EIA 1 5/8" input, EIA 7/8" outputs.

ACT4/158/78 4 way splitter. III/IV/V band . Connectors: EIA 1 5/8" input, EIA 7/8" outputs.

NOTE: Please, contact our Technical Dpt. for coupling cables, antenna towers, dehydrators, pressurization devices and other antenna system accessories.

CALIBRATED COUPLING CABLES FOR ANTENNA SYSTEMS
optimized by our antenna systems CAD

NOTE: All the below coupling cables are optimized for standard tacked-arrays antenna systems with vertical polarization. For other array systems or customized patterns please contact our technical Dpt. (e-mail: tech@dbbroadcast.com)

CAV 2 Coupling cable for antenna system. RG 213/50 W, N connector, 2 mt.

CAV 3 Coupling cable for 2 bays antenna system. RG 213/50 W, N connector, 3 mt.

CAV 5,5 Coupling cable for 4 bays antenna system. RG 213/50 W, N connector, 5.5 mt.

CAV 7,5 Coupling cable for 6 bays antenna system. RG 213/50 W, N connector, 7.5 mt.

CAV 9,5 Coupling cable for 8 bays antenna system. RG 213/50 W, N connector, 9.5 mt.

CAV 2 1/4 N Coupling cable for 2 bays antenna system. Cellflex 1/4"/50 W, N connector, 2 mt.

CAV 3 1/4 N Coupling cable for 2 bays antenna system. Cellflex 1/4"/50 W, N connector, 3 mt.

CAV 5,5 1/4 N Coupling cable for 4 bays antenna system. Cellflex 1/4"/50 W, N connector, 5.5 mt.

CAV 7,5 1/4 N Coupling cable for 6 bays antenna system. Cellflex 1/4"/50 W, N connector, 7.5 mt.

CAV 9,5 1/4 N Coupling cable for 8 bays antenna system. Cellflex 1/4"/50 W, N connector, 9.5 mt.

CAV 2 1/2 N Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, N connector, 2 mt.

CAV 3 1/2 N Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, N connector, 3 mt.

CAV 5,5 1/2 N Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, N connector, 5.5 mt.

CAV 7,5 1/2 N Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, N connector, 7.5 mt.

CAV 9,5 1/2 N Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, N connector, 9.5 mt.

CAV 2 1/2 LC Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, LC connector, 2 mt.

CAV 3 1/2 LC Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, LC connector, 3 mt.

CAV 5,5 1/2 LC Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, LC connector, 5.5 mt.

CAV 7,5 1/2 LC Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, LC connector, 7.5 mt.

CAV 9,5 1/2 LC Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, LC connector, 9.5 mt.

CAV 2 1/2 7/16 Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" connector, 2 mt.

CAV 3 1/2 7/16 Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" connector, 3 mt.

CAV 5,5 1/2 7/16 Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" connector, 5.5 mt.

CAV 7,5 1/2 7/16 Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" connector, 7.5 mt.

CAV 9,5 1/2 7/16 Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" connector, 9.5 mt.

CAV 2 1/2 7/8 Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" connector, 2 mt.

CAV 3 1/2 7/8 Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" connector, 3 mt.

CAV 5,5 1/2 7/8 Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" connector, 5.5 mt.

CAV 7,5 1/2 7/8 Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" connector, 7.5 mt.

CAV 9,5 1/2 7/8 Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" connector, 9.5 mt.

CAV 2 7/8 7/8 Coupling cable for 2 bays antenna system. Cellflex 7/8", EIA 7/8" connector, 2 mt.

CAV 3 7/8 7/8 Coupling cable for 2 bays antenna system. Cellflex 7/8", EIA 7/8" connector, 3 mt.

CAV 5,5 7/8 7/8 Coupling cable for 4 bays antenna system. Cellflex 7/8", EIA 7/8" connector, 5.5 mt.

CAV 7,5 7/8 7/8 Coupling cable for 6 bays antenna system. Cellflex 7/8", EIA 7/8" connector, 7.5 mt.

CAV 9,5 7/8 7/8 Coupling cable for 8 bays antenna system. Cellflex 7/8", EIA 7/8" connector, 9.5 mt.

CAV 2 158 158 Coupling cable for 2 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 2 mt.

CAV 3 158 158 Coupling cable for 2 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 3 mt.

CAV 5,5 158 158 Coupling cable for 4 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 5.5 mt.

CAV 7,5 158 158 Coupling cable for 6 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 7.5 mt.

CAV 9,5 158 158 Coupling cable for 8 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" connector, 9.5 mt.

TV COMBINING FILTERS III-IV/V band

CFU2/06 Two-Way UHF combining filter. Maximum power capacity: 600 Wps. Minimum spacing between channels: 3 ch. Insertion loss: < 0.6 dB. Ch. isolation > 30 dB. N connectors.

CFU3/06 Three-Way UHF combining filter. Maximum power capacity: 600 Wps. Minimum spacing between channels: 3 ch. Insertion loss: < 0.7 dB. Ch. isolation > 30 dB. N connectors.

CFU4/06 Four-Way UHF combining filter.Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 0.7 dB. Ch. isolation > 30 dB. N connectors.

CFU5/06 Five-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 0.9 dB. Ch. isolation > 30 dB. N connectors.

CFU6/06 Six-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1 dB. Ch. isolation > 30 dB. N connectors.

CFU7/06 Seven-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1.1 dB. Ch. isolation > 30 dB. N connectors.

CFU8/06 Eight-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1.2 dB. Ch. isolation > 30 dB. N connectors.

CFU9/06 Nine-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1.3 dB. Ch. isolation > 30 dB. N connectors.

CFU10/06 Ten-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1.4 dB. Ch. isolation > 30 dB. N connectors.

CFU11/06 Eleven-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insertion loss: < 1.5 dB. Ch. isolation > 30 dB. N connectors.

CFU12/06 Twelve-Way UHF combining filter. Maximum power capacity: 600 W. Minimum spacing between channels: 3 ch. Insert. loss: < 1.6 dB. Ch. isolation > 30 dB. N connectors.

CFT4/400 Four-transmitter combining filter. Star point and directional couplers system. Maximum power capacity 400+400+400+400 Wps.

AUTOMATIC VOLTAGE REGULATORS

Electromechanicals

STM 1/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 1 kVA.

STM 2.5/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 2.5 kVA.

STM 5/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 5 kVA.

STM 7/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 7 kVA.

STM 15/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 15 kVA.

STM 20/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 20 kVA.

STM 35/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 35 kVA.

STM 50/E Single-phase voltage regulat. Vin: 220±25% Vac, Vout: 220±2% Vac. 50 kVA.

STT 5/E Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA.

STT 10/E Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA.

STT 15/E Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA.

STT 20/E Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 20 kVA.

STT 30/E Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 35 kVA.

STT 50/E Three-phases voltage regulat.(voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA.

STT 75/E Three-phases voltage regulat.(voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA.

STY 5/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA.

STY 10/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 10 kVA.

STY 15/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 15 kVA.

STY 20/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 20 kVA.

STY 30/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 30 kVA.

STY 50/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 50 kVA.

STY 75/E Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 75 kVA.

Statics

SSM/05 Single-phase static voltage regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 500 VA.

SSM/10 Single-phase static voltage regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 1 kVA.

SSM/20 Single-phase static voltage regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 2 kVA.

SSM/40 Single-phase static voltage regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 4 kVA.

PARTS FOR SURGE and LIGHTNING PROTECTION SYSTEMS

In order to prevent transmitters' power supplies damages caused by mains surges or lightning, it is recommended to use a surge voltage or/and lightning protector better if coupled with an insulation transformer installed immediately down-line of the mains entrance or before the transmitter to be protected.

LP/22 110/220/240 Vac Single-phase lightning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.

LP/38 220/380/415 Vac three-phases lightning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.

SA/22M 110/220/240 Vac Single-phase surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.

SA/38T 220/380/415 Vac three-phases surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.

TSM05/11 Insulation transformer, 110/110 Vac single-phase, 500 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM05/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 500 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM10/11 Insulation transformer, 110/110 Vac single-phase, 1000 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM10/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 1000 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM20/11 Insulation transformer, 110/110 Vac single-phase, 2 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM20/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 2 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM30/11 Insulation transformer, 110/110 Vac single-phase, 3 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM30/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 3 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM50/11 Insulation transformer, 110/110 Vac single-phase, 5 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM50/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 5 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM100/11 Insulation transformer, 110/110 Vac single-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TSM100/22 Insulation transformer, 220/220 or 240/240 Vac single-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST80/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 8 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST80/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 8 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST100/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST100/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST150/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 15 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST150/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 15 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST200/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 20 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST200/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 20 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST300/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 30 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST300/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 30 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST400/22 Insulation transformer, 220/220 or 240/240 Vac three-phases, 40 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

TST400/38 Insulation transformer, 380/380 or 415/415 Vac three-phases, 40 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.

Cabinets for surge and lightning protection systems

To be placed under the transmitter or immediately down-line of the mains entrance.

CSL/03 Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 3 kVA.

CSL/05 Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 5 kVA.

CSL/15 Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 15 kVA.

CSL/30 Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 30 kVA.

CSL/40 Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 40 kVA.